Get matched with top window a/c unit service or relocation pros in Hobart, WA

"Professional and courteous. They're not going to do you any favors but their service is solid. They fixed a leak on my Mitsubishi Mr. Slim ductless mini-split (a heater/ac wall unit). First, one of their techs came out to diagnose. He checked some stuff, found that there was no refrigerant and scheduled an LSR tech (leak, search and repair). Diagnosis: $215 The LSR tech came out, checked the system and found that there was a loose valve. He tightened it and checked the system and we were good to go. He evacuated the system and charged it with refrigerant. He also did maintenance on the outside unit. It looked pretty clean after he was done. Nitrogen Leak Check System (bubble test for leaks): $651 Repair Each Leak and test: $193 per fix Evacuate System: $432 Charge System with Refrigerant: $491 Subtotal: $1982 Yup, two thousand dollars. This is Seattle for you and not sunny Los Angeles. They probably could have taken off the fix charge but I get it. Either way, they fixed my system and I'm happy. I would recommend Greenwood based on their solid service and professionalism. If you're getting an AC unit fixed get quotes! I submitted requests for quotes after the diagnosis and out of the 5 or 6 companies that I contacted nobody would give me a quote and they wanted to send out their own tech to diagnose. But I already had a diagnosis. So I just went with Greenwood. I hope this helps someone out there. My AC is ice cold and I'm happy. Maybe it'll spit out popsicles!"

"Service tech was excellent. Difficult diagnosis; a very rare break in electrical current between the air handling unit, heat pump and thermostat. Very knowledgeable good at troubleshooting. Polite, friendly, explained everything very well. Standard service charge call plus tax for two hour visit, included standard annual maintenance at no charge. Less expensive than anticipated."

"Mark's guys went above and beyond to replace my old furnace with a high efficiency model from Lennox, and upgrade my old electronic water heater to a gas water heater. It's done on time and passed inspection. We highly recommend their services."

"Ranger did a great job. The estimators were friendly and thorough, the installers and team we encountered were all respectful and hard working. There was a problem with the electronics in the thermostat from the factory, they worked late and had to bring a new thermostat the next day, but the new one works perfectly. We will hire again for any other HVAC needs. We chose a higher quality AC unit and are glad we went with a quieter model, the unit is so quiet in the backyard."

"Our hydronic heating stopped working after a power outage, so I paid extra for their emergency service to have a technician visit and diagnose the problem during the weekend (just before Christmas, no less!). The person on the phone was very friendly, and a technician named Todd arrived within the hour. Unfortunately, the issue required a part that had to be ordered and with the holiday we had to wait a few days. Once the part arrived, Day & Nite called right away and I was able to schedule Todd to come out the next morning. Todd was no-nonsense in the good way -- you can tell he's a skilled professional and cares deeply about his work. It took him about a little over an hour to replace our valve, and when I was paying he answered a number of questions I had about the heating system's overall setup and general maintenance that should be performed. We inherited this system from the previous home owners -- and I have zero previous experience with a hydronic system -- so I really appreciated the extra time Todd gave to explain more about it."

"We had central AC added to our home 5 years ago. We decided to get an AC and furnace tune up before the summer. Matt, the technician from One Hour Heating and Air, was on time and polite. He pointed out that our furnace filter had not been changed since 2022. Big oversight by me. Matt explained how the air flows through the furnace and the direction the filter needs to be placed. I marked with a sharpie on the furnace an arrow so I would remember next time. Positive experience."