Get matched with top drain line breakage camera locaters in your area

"Installation went great - plumbing work looks excellent. Knocking off a star as the wood shavings from drilling weren't cleaned up and the covers on the water shutoffs weren't closed completely."

"I made an appt with them for Wednesday from noon to 2. They no showed and didn’t bother to call. I called back Friday and they agreed to come out right then. However, the truck didn’t have enough to pump my entire septic and they said they would come out first thing Monday. They no showed again on Monday. Four days later they tried to contact me to reschedule. I refused at that point. I can’t be kept waiting for 2 weeks for whenever they feel it is convenient for them…if you make an appt, keep it!"

"Always showed up as promised and quality work! Greatful for their service"

"Oscar and his team were very professional. The guys he had assigned to my job worked really hard to get the old concrete shower walls out of the shower area and replace with a nice modern shower. The job was a complete bathroom remodel and was completed within my budget. Really good job!"

"Came when they set up appointment. Did great work."

"I was highly pleased with the professionalism and quality of his work and would feel comfortable referring Donis to friends, family or anyone else."

"Exactly what I wanted with exceptional craftsmanship on our custom screened in porch and custom made Porch Swing."

"If you are reading this review, I wish I could speak to you face to face and tell you (implore you) not to use Flaker Flooring for services. We hired them to install laminate hardwood flooring in our small condo in Keowee Key. We hired them based on decent prices and decent reviews. There were issues with timing and punctuality. The price was increased twice due to needing to to extra work to level (which we agreed to with no issue). Once the work was "complete" there were issues. There were missing transition pieces, missing pieces near the sliding glass door, missing quarter round in areas, and BUBBLING in the flooring. We adressed our concerns and transition pieces and quarter round were added. Upon final inspection the cuts to the wood, around corners, vents, etc were rough. There were gaps at corners that the quarter round didn't cover and there were bubbles/humps throughout the flooring. Never have I seen floors that are not flat. We were told by the contractor that there was nothing he could do and the floors would settle. These were there upon installation. Well, about 6 months later, the bubbles have become large hills in the flooring, and the floor is rising to the point where doors no longer shut because they scrape the flooring. When we called the contractor back out, he said he had no idea why that was happening and wasn't sure how to fix it. We had a reputable flooring contractor come out and inspect the floors. He said that without a doubt, this was an install error. The floors were installed way too tight. There is supposed to be space where the floor meets the wall. This is what the quarter round is there to cover. There was no space. The subfloor also had issues that we were never made aware of. The new contractor stated Flaker Flooring should have never placed floors without replacing the subfloor. There were no temperature or moisture issues present. Again, we never heard a word about it. We paid $7k to have the flooring replaced (as it was unusable) and the work redone. We have asked Flaker Flooring to simply refund their work, and they have yet to. The bottom line is: if you are looking for quality work and a contractor that has integrity and will stand by their work (especially if they make errors)... look elsewhere, and be sure their work comes with a warranty. Please don't trust the other reviews as we did. Please do not use this contractor. You will likely have to have the work redone."

"This was amazing! I had no idea this service existed. After searching and contacting various repair places for my washer, this was the most cost effective option. I figured if it didn't work, my machine is old and I would be out $40, not the $100+ to have a tech come out and just diagnose the problem. I am pretty handy and my washer is old anyway, so if it is broken, I have to get a new one anyway. My tech, Steve, was great! He predicted what was wrong after listening to the machine, calmly walked me through dismantling the machine and when we got down to the motor, he was right! He sent me a link to the part I would need, and let me know to contact them again if I needed help installing it. My machine works even better than before it broke, its beautifully quiet and efficient. I will definitely be saving this company for any future repairs on appliances I may need. The service was $40 + the part cost, which was about $8."