Get matched with top sump pump or interior foundation drains installers in Swampscott, MA

"Guiles Hall and Jason Lewis came to repair pool deck. Had major cracks and settling. They raised slabs and filled cracks. They were punctual, professional and did a great job. "

"Fast, efficient."

"Did exactly what we needed them to quickly and professionally"

"Hired 128 plumbing today to replace a shower and tub faucet. Technician (Stephen L) arrived, and we discussed what needed to be done. Stephen got rite to work and got all the repairs done in a timely fashion. He was friendly, efficient and took the time to answer all my questions on the repairs that I had. Good technician. This was my first time with this company, but I would probably hire them again for their efficiency and timeliness. thank you."

"Eric was very precise in his work. We had some speed bumps that occurred due to the full gut of the bathroom. He dealt with problems effectively and kept us informed as to what he needed to do and why. Eric was great to work with and the end product was perfect. We would recommend Hot & Cold Plumming!"

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"Atlas Glen-mor I’ll give you the quick facts on Atlas Glen-mor if you have time please read the full history below. Facts • I used to pay a premium price for auto-refills. Despite this, Atlas Glen-mor let my tank run out of oil during the coldest week we have had in New England for years. • I was put on hold for 45 minutes each time I called Atlas Glen-mor (I had to call at least 8 times in the span of 24 hours). • Atlas Glen-mor didn’t care that I have two kids (ages 5 and 8) and that we had to leave our home because temperatures reached 31 F inside the house. • Atlas Glen-mor will not give you a time estimate when they will come to your house. Furthermore, they do not call the second phone number on file, if you don’t answer their first and only call to let you know they are coming to your house. • Our basement pipes froze and a pipe in my living room broke, due to my house not having heat for days during the coldest week in New England. I had to pay close to $1,000 for a plumber to come at 11pm Saturday night to fix my broken pipes. There is damage in my living room floor, basement ceiling and wall. All due to the fact that Atlas Glen-mor left me with no oil and “couldn’t” get me service on the same day. • Atlas Glen-mor never came to prime my system, I had to pay $200 for “emergency service” to another oil company that sent someone 2 hours after I called for help, while Atlas Glen-mor, my oil company for the past 8 years, didn’t send someone for over 48 hours. • Bottom line: as a result of Atlas Glen-mor’s incompetence and negligence, my kids and I had to leave our home for 4 full days and I had to spend thousands of dollars simply because Atlas Glen-mor let my tank run out of oil. Atlas Glen-mor has the worst customer service I have ever experienced. The Full Story On Tuesday January 02, 2018 I ran out of oil. After 45 minutes on hold waiting to speak to my oil company, Atlas Glen-mor, I was informed the earliest I could get service was Friday (2 days later). When I told them that I ran out of oil they, told me I was already in the schedule to get a refill on Wednesday. I want to emphasize: they agreed to an oil refill only because I was already on their schedule, not because they let my tank run out of oil or because I have two kids (5 and 8) and it was the coldest week in New England. Finally, Wednesday afternoon, a driver comes and fills up my tank, but to my surprise he doesn’t know how to prime it so now I had oil but still no heat. After another 45 minutes on hold, I was told the earliest they could come was Friday, even though I told them my kids and myself had to leave my house since temperatures had dropped too low to stay (31 F inside the house). I asked if they could give me a time frame on Friday, so I could make sure to be there, their answer was “NO, we will call you.” Then I asked: can you let me know 20 minutes before coming so I can make sure I get there? Their answer was “we will call you before going to your home” period. So, Wednesday night the kids and I had to leave our home, Friday morning comes and I get a message from my husband saying he has a missed call on his cell phone. Sure enough, it was the oil company—they didn’t call me, they called my husband. I rushed home only to have missed them by 10 minutes (according to my neighbor) so I called again and after 45 minutes on hold the lady tells me I missed the service visit and that now I had to wait until Monday to get someone to my house to prime. At this point I was crying on the phone, asking her why they called my husband’s cell phone and not mine, and if they didn’t get an answer why didn’t they call my cell phone if both numbers are on file. She replied “we don’t have time to call another number.” I started calling other oil companies around my area, to my surprise they all answered the phone on the spot—no waiting times. One company tells me they have an emergency service and they could come prime it that same afternoon and they would call me 20 – 25 minutes before coming so I would have enough time to get there. I am not their customer and they treated me 100% better than my oil company for the last 8 years. I had to pay them $200 for a service that’s included with my oil company, but at least I got my heat again Friday night. The house was so cold (31 F inside) that we couldn’t stay, we had to sleep out of our home another night. We came back Saturday afternoon to find that the pipes in my basement had frozen and a pipe in my living room broke. Now we have water in our living room, the basement ceiling broke and we have water in our finished basement too. We had to call a plumber that stayed with us until 2am Sunday, helping us repair and unfreeze our pipes. I had to pay him close to $1,000 and I still don’t know how much is the cost for all the damage to my basement ceiling and walls. In summary, during one of the coldest storms in NE history, every company apart from Atlas Glen-mor was trying to help people that were not even their loyal customers, while my company for the last 8 years treated me as an afterthought, and in the process caused thousands of dollars in damage to my house. THANK YOU Atlas Glen-mor for the worst customer service I have ever experienced."