Top-rated carpentry framing installers.

Get matched with top carpentry framing installers in Browns Mills, NJ

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Carpentry framing installers in Browns Mills

Avatar for A.W. Martin, Inc
A.W. Martin, Inc
4.0(
72
)
Carpentry Framing - Install

Serving Browns Mills, NJ and surrounding areas

Approved

In business since 1991

Free estimates

Emergency services offered

"A frozen pipe in my mother’s kitchen above a finished garage left us in dire straights. The exterior of the home is brick construction from the 1950’s but the pipe froze in such a way as to run across the floor and ruin the vapor barrier in the exterior walls. How to replace it without tearing down the brick? I asked seven contractors for a bid. All came out to look at the job, but it was a complicated repair in a persnickety township. Only two of them actually gave me a bid. I chose A.W. Martin and I’m glad I did. His bid was slightly higher, but his word was true: all expenses he had reckoned with wound up being covered by our homeowner’s insurance. Plus I had direct access to Tony via his cell phone at all times - a novelty to me since it did not work that way when I had used the insurance-preferred contractor for a previous repair. Indeed, communication was superior! Tony took the time to explain all aspects of the job in layman’s terms and didn’t mind if I called back for further clarification. He advised me about modifications that wouldn’t cost much now, but would save big bucks in the future. Tony worked around my schedule, which was important to me since I lived out of state and was overseeing the project from a distance. He sent workers from his team who spoke standard English - important to my elderly mother who is hard of hearing and has trouble understanding folks with accents. (Some of his subcontractors did speak Spanish). To save me money, Tony let me provide a shelving unit that I wanted recessed in a wall, charging only for installation and trimming it. And he dealt with all aspects of the township permit process - no small deal for the township my mother lives in! His electrician, Tim Murphy, installed my preferences of where the ceiling lights should be to the inch - to the inch! This electrician came back out at no charge one week after things were finished when the washing machine ground-faulted out and my mom needed help. It hasn’t happened since. I found Tony to be amiable, generous with his time and very concerned about customer satisfaction. The one down-side was that I had requested no work over the weekends, since Saturday was my day of worship and Sunday my mother’s. I did have to take him to task for scheduling subcontractors on Saturday, and he rescheduled them. If you are a seventh-day Sabbath keeper be very explicit about your request for no Saturday work. All in all, my experience using A.W. Martin was superior. I highly recommend Tony and his company. When I started the repair I had over twenty numbers for contractors on my cell phone. After the job, I am down to four: Russel Garage Door, Rich’s Carpet One, the electrician Tim Murphy, and A.W. Martin, itself."
Seahorse Shower
Tile artwork
Shower pan
Jacuzzi tub
Natural stone wall

+39

Response time4 days
Response rate100%
8 neighbors recently requested a quote
Mr. Quality, LLC
3.7(
3
)
Carpentry Framing - Install

Serving Browns Mills, NJ and surrounding areas

Approved

In business since 2018

Free estimates

Small jobs welcome

Mr. Quality, LLC, takes great pride in our experience, expertise, quality, and customer service that we provide to meet the consumers' needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, Mr. Quality, LLC, takes great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

Response time30 mins
Recommended by100%of homeowners
Avatar for 3D Painting LLC
3D Painting LLC
4.9(
53
)
Carpentry Framing - Install

Serving Browns Mills, NJ and surrounding areas

In business since 2019

Free estimates

"3D, and owner Denis, were great. I got several quotes, and there's was very competitive. I had a substantially sized exterior wood perimeter fence that needed to be stained via spray application. 3D was very responsive, good communication, and the fence looks great. They also had to color match the stain against a neighbors fence, and they did it perfect! Would strongly recommend."
Exterior Painting Project
Painting - Exterior Project
Interior Painting Project
Interior Painting Project
Interior Painting Project

+146

Recommended by98%of homeowners
Avatar for Central Lending Svc Inc dba Credit Central
Central Lending Svc Inc dba Credit Central
4.8(
72
)
Carpentry Framing - Install

Serving Browns Mills, NJ and surrounding areas

In business since 2003

Emergency services offered

"Contacted Mark and he quickly responded.  We quickly walked through mortgage application and he found a great rate with favorable terms.  Mark assisted us through the entire process, ensuring we were on schedule.  He even helped us find better hazards insurance rate than we found on our own.  Throughout the process, Mark was very responsive, always available and went the extra mile - often swinging by our house to drop off materials.  I would not hesitate to use Mark again.
"
Additional Photos
Recommended by100%of homeowners
Avatar for Fine Painters Inc
Fine Painters Inc
4.4(
281
)
Carpentry Framing - Install

Serving Browns Mills, NJ and surrounding areas

In business since 1996

Free estimates

Emergency services offered

"Overall it was a bumpy ride, but the end result is very good.  I feel the supervisor was basically absent from the job, and clearly did not ensure the crew understood exactly what was to be painted.  I had to inspect and supervise the job from start to finish, and ended up having to bring them back twice to finish the job because areas were either not given a second coat, or were missed altogether.  The end result is fantastic, but only because I was such a stickler and made them come back and fix things to my satisfaction.  I would still recommend them because their price was great as compared to multiple other estimates, and the quality of their work is strong, as long as you are willing to stay on top of them and inspect thoroughly.  Throughout the job, they were very respectful, friendly, and cleaned up after themselves very well."
Recommended by89%of homeowners
Avatar for Easy Way Construction LLC
Easy Way Construction LLC
5.0(
26
)
Carpentry Framing - Install

Serving Browns Mills, NJ and surrounding areas

In business since 2008

Free estimates

Credit card accepted

At Easy Way, we are focused on providing home remodeling services with the highest levels of customer satisfaction & we will do everything we can to meet your expectations. With a variety of offerings to choose from, we're sure you'll be happy working with us. Look around our website and if you have any comments or questions, please feel free to contact us. We hope to see you again! Check back later for new updates to our website. There's much more to come!

Avatar for Merryfield Construction Group
Merryfield Construction Group
4.5(
125
)
Carpentry Framing - Install

Serving Browns Mills, NJ and surrounding areas

In business since 2003

Free estimates

Warranties offered

"Very well. The salesman was very professional; not pushy and didn't sell his company by putting other companies down. The installer was on time, courteous, professional and completed the work neatly and quickly."
Mullica Hill
Checkerboard View
Master Bath Retreat
Additional Photos
Additional Photos

+1

Recommended by95%of homeowners
...
Showing 1-10 of 146
FAQs for carpentry framing installation projects in Browns Mills, NJ

Professional contractors complete basement framing in three to five days, depending on the size and complexity of your space. Projects with simple, open layouts progress faster than those with multiple rooms and corners. DIY framers should expect the job to take significantly longer, potentially seven to 10 days or more, depending on experience level and available time. The timeline doesn't include other aspects of basement finishing like drywall installation, electrical work, or finishing touches, which extend the overall renovation schedule.

Most municipalities require building permits for basement framing projects. These permits cost between $1,200 and $2,000, ensuring your renovation meets local building codes for safety and structural integrity. Working without proper permits can result in penalties, forced removal of completed work, and complications when selling your home. Your local building department can provide specific information about permit requirements, inspection schedules, and any special considerations for basement renovations in your area.

For basement framing, use pressure-treated lumber for bottom plates (the horizontal boards that contact concrete floors) to prevent moisture damage and rot. Standard kiln-dried lumber is suitable for wall studs and top plates that don't directly contact concrete surfaces. The most common lumber dimension for basement wall framing is two-by-four, though some situations may call for two-by-six lumber to accommodate thicker insulation. Always check local building codes, as some jurisdictions have specific requirements for basement framing materials.

You can install drywall after framing is complete and inspected, but several important steps should happen first. Ensure any electrical, plumbing, or HVAC rough-ins are completed and inspected before closing up walls. Installing insulation between studs is highly recommended for temperature control and moisture management. Drywall installation adds an average of $3 to $4 per linear foot to your project, with painting costing an additional $2 to $6 per square foot. Address any moisture concerns before enclosing walls to prevent future damage and mold issues.

The Browns Mills, NJ homeowners’ guide to carpentry framing installations

From average costs to expert advice, get all the answers you need to get your job done.