Get matched with top sewer main install, replace or repairers in Everett, MA

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business! Book with us online or feel free to give us a call today!

"This was the second time we used H L Bowman for our plumbing needs and we have been impressed both times. Their plumbers are prompt, courteous, and friendly, in addition to being great at their craft. For this visit, I had a leak under a kitchen sink and did not realize that I needed to have the entire faucet replaced. The plumber recommended the closest plumbing supply store and waited while I selected the one I wanted. He efficiently did the replacement. Very happy with H L Bowman and would highly recommend them."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"I came home from work to find all my drains were not draining. I tried some basic troubleshooting, but could not figure out the issue. I called heritage ( which was after hours). Within an hour, the technician Derek arrived, I gave all the information to him, and he started immediately. We narrowed it down to an issue with the septic. 10pm we are outside digging up the septic to get a look. Dereks knowledge and experience quickly identified the issue. The whole time he was friendly and informative. It didnâ t matter the time of night it was, he was determined to fix the issue. He was repairing in a way that would keep the cost down. That rarely happens with contractors. Within 30 minutes, he had the main drain cleared from the house to the septic. Derek even took the effort to double check from the opposite end in my house to make sure it was up to his standards. The whole time he is sharing knowledge and explaining the cause and effects and how the system is designed. When the job was finished, we went over the invoice. I couldnâ t believe the price! For emergency service, and the work that was done, the price was extremely fair. I highly recommend heritage plumbing and heating, and of course Derek."

"Van is the nicest guy, but clogged drains don't care, so he becomes an Alligator gobbling up the **** in your blocked pipes. He found and cleared my blockage almost 50 feet deep in the pipes! He quickly replaced the broken washer that caused the leaking in my garden faucet. He replaced a tough fixture that I realized afterwards I could never have done. He used to work for Roto-Rooter, so he's got mad skills, but imagine all the experience and the same equipment with a personal touch from a friend who genuinely cares about your sink backing up and grossing out your family. It all began when my regular plumber said he doesn't mess with clogs and referred me to a big-name franchised drainage cleaning company. They were too busy and I was too desperate. I had people coming over for the weekend and everything flushed was finding it's way into my basement bathtub. I tried the intriguingly named Alligators Rooter and Van came over early on Saturday morning. Not only did he root out the problem, but charged me the low end of his price range. You know when someone says it'll cost between this and that, he means THAT! But not Van. He's honest, amiable, and gets the job done! Root for Van, he's The MAN!"

"There's nothing glamorous about replacing a sewer pipe, but when you can't flush the toilet, you don't want to fool around. Dennis and his crew did a great job in a timely manner. Aside from the good work, it was a pleasure doing business with Dennis. He contacted me immediately after I submitted the project (within a couple of minutes), and responded quickly when we had to get in touch with him."

"Larry from Just Drains was absolutely great to work with. He was professional, knowledgeable and incredibly decent. I joined Angie's List, in part, to sing his praises. 
My main sewer line recently backed up due to tree root intrusion. It was awful. I jumped online and started calling area plumbers, and one company was particularly responsive. However, the plumber who arrived could only provide a very temporary fix because he didn't have the necessary equipment. In the end, (and to his credit) that plumber returned two more times in an effort to remedy the problem, but each time had equipment issues and wasn't able to do much. 
I then found Just Drains and told them my story. I talked to Larry on a Sunday and he was at my house Monday morning. He had the tools and a lot of know-how. Larry scoped the line, cut out a good amount of roots, and used RootX to (hopefully) keep the roots at bay for up to a year. 
Most impressively, he took pity on me because I already spent so much money trying to fix the problem (I even rented an electric snake from Home Depot during my frustrations with Plumber No. 1) and didn't charge me the approximate cost of his services. It was one of the most decent acts I've seen from a service company.
I'm working to figure out a more permanent fix to my main line (it's 85-year-old), but it's comforting to know I have a good person/company available to help me manage the problem."

"I highly recommend All Town Plumbing Services. Extremely professional, fast & efficient."

"cleaned a clogged waste water pipe"

"Hired 128 plumbing today to replace a shower and tub faucet. Technician (Stephen L) arrived, and we discussed what needed to be done. Stephen got rite to work and got all the repairs done in a timely fashion. He was friendly, efficient and took the time to answer all my questions on the repairs that I had. Good technician. This was my first time with this company, but I would probably hire them again for their efficiency and timeliness. thank you."