Get matched with top swamp cooler installers and replacers in Chico, CA

"100degress out my adult disabled sons system stopped working and it's to hot out for him. I called bobs explained our concerns that day they came out , the system was 34yrs old we ordered a new one ,bobs staff brought a temporary cooler over help my son a great deal .the following Wednesday bobs staff was putting in new system very professional and caring couldn't have done a better job thank you."

"Keith came over for an estimate the previous Friday, took one look at our old tank water heater, and let us know what a liability it was.  We were then persuaded to go with a tankless water heater -- I have to say that I wasn't hot on the idea initially due to cost recovery being nearly impossible on them due to high installation costs having to rejigger the plumbing, add electrical, and update the venting.  However, we had decades of code violations which would have added up to a monstrous cost (especially for the vent) to replace with a normal water heater.  The NPE-240A that we were persuaded to purchase uses PVC venting, which is routable through older metal vents -- thus is a cost reduction over installation of new, up-to-code metal venting.
Note that Gallagher will have a promotional first-visit price.  If you don't sign the dotted line to purchase a major service from them on that first visit, the price may increase by several hundred dollars on the next visit.  That is a little bit of a pressure tactic and we would have done a bit more homework had we known of it.  However, in this case, we had a potentially disastrous situation on our hands with that 23 year old water heater and didn't much feel like tempting fate by checking with other contractors for their costs and quality of service.
 After Keith left, I began to do some additional research.  I came to find that flush valves are a huge convenience with tankless water heater.  They allow you to easily isolate the house plumbing from the tankless water heater, connect two hoses to the heater and a pump, and circulate a lime scale dissolving solution (such as house-hold vinegar) to remove the scale from the heater exchanger.  I was worried that the install wouldn't come with these flush valves.  I called Gallagher at 9am on a Saturday morning and asked if they would be installing flush valves.  The initial answer from the on-call plumber was no.  Fortunately, Keith provided his personal/work cell phone.  I called to verify the no answer.  He assured me that the flush valves would be installed (and yes, they were -- and high quality valves too; single ball-valve, cast in Italy!).  Thanks, Keith, for taking my call on your off day.  That saved everyone a lot of grief :-)  So my nerves were soothed and I waited patiently for Monday to get that old, possibly leaking, tank water heater out of my house.
 On Monday, two technicians came out on time (Travis and Chad).  I don't recall which one was the experienced plumber, but one of them was definitely new and needed the experience (we all start from somewhere).  Both set out to do their work and were fairly efficient.
Only one mistake of note was caught.  The lesser experienced technician did accidentally cut a hole through my gas furnace vent cap, believing it to be the water heater vent cap.  The mistake was caught, and some sheet metal was cut and the cap was repaired with some mastic and water repellant stuff.  I don't know if that's code but I suppose I'll find out when the code inspector visits to close the permit... certainly the last thing I need is CO entering the house because the cap was reinstall or repaired incorrectly.
The copper pipes were completely reconfigured, and even shortened (which is always good for water pressure and heat retention).  The PVC outlet vent was installed through the old vent and spray painted black.  It can hardly be seen from the highway.  The experienced plumber ensured that the system worked well at full firing.  He didn't have a Manometer that worked with the unit, so we didn't get our gas pressure tested.  He said that the inspector should be able to do that; should I have made him come back to test the pressure?  Well, it seems to work with the gas stove going, but I haven't had a chance or a cool day to test the furnace plus the water heater and the oven.  Backing up a bit, they did install an outlet into the water heater closet, tying into the bathroom electrical on the other side.
The final result looked nice; the valves were mostly positioned in an accessible way.  The hot water flush valve is a little hard to access with the gas trap in front of it.  But everything got insulated, and a bit of PEX tubing was installed for the condensation line.  That was also insulated, so UV degrading the PEX shouldn't be a problem?   The heater was installed in an exterior water heating closet with a vented outside door.  The condensation line was linked up with the A/C condensation line.  The A/C condensation seems to still make it out.  Bonus that the PVC was extended off my patio, but the condensation does now exit just behind the A/C unit. I've read that the Navien produces somewhat acidic condensation so I'm only slightly concerned that large amounts of condensation could cumulatively affect the A/C metal footings.  We'll see what the inspector says (I'll update this review after that is completed).
Overall, the experience was nice, and we were not bothered too much with the Gallagher membership plan like last time.  The techs were personable and willing to explain what they were doing.  They even let me see what a bad idea it is to have galvanized piping interact with copper piping.  Yuck!  It is nice to get rid of all those corroded galvanized stub outs between the old tank water heater and the main service to the house.  They didn't mind that I was looking over their shoulders the entire time; personally, I hate when others do that to me, so good on them.  The experienced plumber graciously repaired some of the busted out dry wall with some of my left over dry wall, which was great, and helped complete one of my DIY items.  Only other thing that comes to mind is, ensure that the techs clean the cold water inlet filter after testing the tankless water heater.  I had to do that myself (per the install instructions that came with the unit) and it had some debris from the performed work.  The tech did explain how to clean that out as it is regular maintenance for tankless water heaters.  He also let us know that there is an inlet air filter that is easily cleaned.
Good experience overall; a few minor (?) issues cropped up.  I'll update this review when the inspector checks on the work.   The heater works great, even without a recirculation line.  I'm much happier to be serviced by a tankless water heater!

** Update post-Inspections **

After waiting a few weeks, and inquiring Gallaghers about the permit, and then receiving it shortly after that inquiry, we had the City inspector over.  He found that the tankless water heater did not have a properly sized gas input.  He caught the fact that the gas line reduced down to 1/2" somewhere after the house furnace.  For some reason the old water heater and adjacent stove had 3/4" pipe connected to that 1/2" pipe.  The installers did not notice this as a potential problem.  The inspector was concerned that if the house furnace were going, there wouldn't be much left over for the house tankless water heater.  Thus he wrote up the install as needing 3/4" pipe all the way to the water heater.  He also detected a hint of natural gas smell in the water heater closet.  We pointed out that the house furnace roof jack had been damaged and repaired.  The inspector took a look and wasn't so sure that the mastic would hold up to the vent's output heat.  So the jack/bonnet would have to be replaced.

It took one night to get a plumber out to fix the gas leak.  It took 3.5 weeks to get plumbers out here to fix the inspector's red tag items for upsizing the gas line and replacing the vent bonnet.  We had called Gallaghers many times during those weeks and were told they would get the installers in touch with us to schedule repa"

"Sooo....first, Jim is a very nice guy.  However, Jim now works in Nashville during the week and is only home to the Huntsville area on the weekends.
My first impression of him was that he was awesome.  My computer system had crashed because I pulled the plug during a thunder storm before the computer fully shut down which resulted in the computer hanging up.  Jim took my call while in Tennessee and suggested how to fix the system.  For this I am very grateful.

What happened next was I had him come and check my computer to make sure everything was working properly.  He came to my house and spent an hour tweaking it (basically running various checks on the system), for which I paid him $50.  He suggested that my laptop would work much better if I had Windows 7 and increased my RAM up to 4 GB.  He said he could install it for me for (including the RAM) for about $160.  We met the following weekend for the handoff and he loaded Window 7.  When I received the call it was ready, the bill was $227.50.  I was surprised that is was $70 more than quoted, but paid it anyways.  When I asked about the RAM, he mentioned he did not upgrade the RAM and this would be another $60.  I was a little discouraged at that point since I felt like I was being taken advantage of, but the guy is relatively nice, so I said to go ahead and order the RAM.  He did so and the following weekend was supposed to install it.  Due to some personal things in his life, he wasn't able to install it, so I picked it up since I had to go out of town and could use the IT guy at my new location to install it for me.  When we went to install the RAM, the system wouldn't let us do it since my particular type of laptop can only take 2GB of RAM max.  If Jim had gone to the crucial.com website (where he bought my RAM) and entered my computer system on it, it would have told him the max amount of RAM that could be installed on that unit.  He did not do that.  He is supposed to refund my $60 this next weekend.

I think if Jim wasn't burning the candle at both ends by having a job in Tennessee during the week and trying to run this business on the weekends, it would've been a better experience.  Perhaps taking a few extra minutes to SLOW DOWN and write out an estimate of everything he would need for the job including the prices would ensure people know up front how much the repair would/should cost so they can budget accordingly.  I think if he had taken that approach, it might've been a better experience.  So now I am stuck with a laptop that runs slower because Windows 7 uses more memory and a laptop that can't be upgraded to more RAM.  Basically, the last step which cost me almost $300 was not necessary.  If you need something simple done like coming back from a system crash, he would be okay to use.  Otherwise, for the bigger jobs, I recommend he provide a written estimate with the items he plans to do.

UPDATE:  After posting this review, I received a number of text messages from Jim commenting on the bad review.  I understand he is upset, but harassing someone about a review is not a good way to go.  My review was honest and not meant to be mean, but to let those that use Angie's list get what they pay for...an honest review of someone's experience."

"Mega Power Electric is an excellent company to work with. Gary and his team are knowledgeable, honest, and will go out of their way to get the job done right. We installed panels and solar battery storage unit in our home and we're reaping the benefits of being clean and green."

"A pleasant experience from start to finish. The quoting process was a good two-way discussion, and cordial - no pushy salesman telling you how bad Company X or Y was. Just honest, factual, and straightforward. They quoted us a system with the panels, racking, and inverter which we wanted, not what they were pushing. The quote wasn't the best (hence the 'B' for price) but it did offer the best VALUE when we considered the equipment specification and the stability of the company - an important consideration when looking at a system with a 25 year life! The installation was scheduled by our coordinator, Sherry, and the team showed up when promised and got the job completed on time. Quality of workmanship was first rate and the entire installation was done with care, and tidied away before the team left. Permitting and PG&E inspection were all handled by Sherry, and that was also quick and flawless. Overall, the system they installed easily meets their projections in terms of performance, and it effectively pays for itself. We really couldn't be more pleased with NRG Clean Power and have recommended them to friends and neighbors. We'd recommend you give them your consideration if your looking for solar power."

"Choice was fast, efficient, and kept me posted on the progress of the claim. Although the water leak issue was discovered on a Friday, they had a plumber there to investigate by Saturday morning. When it was determined that the 20+ year old heater needed to be replaced, the replacement ordered, on-site, and installed by Wednesday morning. I am glad that we opted for the Choice Ultimate plan as other than the initial $65 service fee, all but one $50 ancillary expense was covered."

"Well, the first time the replacement was ordered it was the wrong one, which of course, delayed the installation a week. When it was finally installed I had to pay an additional $850 for code upgrades. This I was not informed of by Home Shield. Then we noticed that there was water on the garage floor and found that the pipe coming in from the wall was leaking at the wall so had to call the plumbing company back out to fix it. They first tried to say it was not their fault but since there wasn't a leak before they installed they did fix it. I have used Home Shield a few times before and never had a problem. Some of the companies they use are not the best so you have to research them before you commit. I have found HS service to be good if you do your homework. At the end of the day I was without hot water for almost 3 weeks but it was do to the plumbing company they sent out."

We offer a variety of handyman services. We guarantee your satisfaction, and we won’t leave until the job is done right. We pride ourselves on the quality of work we provide, while delivering great customer service! Check out all the services we offer below and call -or- click to schedule an estimate today! \n

"We purchased a heat pump. The sales rep was professional and very knowledgeable. He didn’t try to sell us more than we needed as others did. Sears worked with us on fast installation. The install process could have been neater, but we are picky. The heat pump is wonderful and we’re very happy with it."

Sears Home Improvement Products � Heating and Cooling\n\nSears can provide the right solution to your home improvement needs. We offer a full line of exclusive Kenmore� and Carrier� heating and cooling systems. Get the brands you trust from the name you recognize � Sears. Schedule your FREE In-Home Consultation today!\n