Get matched with top water main install, replace or repairers in Lynn, MA

"I hired this company to replace a 75-gallon gas water heater, and the experience was excellent. Scope of work: Removal and disposal of existing unit Installation of new Rheem 75-gallon gas water heater Reconnection of gas, water, and venting The team was prompt, professional, and clearly experienced. They provided a clear explanation of the installation process, answered questions directly, and completed the work efficiently. I valued their use of text messaging to arrange the work, as it was most efficient and allowed me to share photos of the work area so they could plan the installation in advance. The installation was clean and well-executed, with attention to proper setup and safety considerations. Pricing was transparent and consistent with the scope of work. There were no surprises. Overall, this was a high-quality, professional installation. I would recommend them without hesitation."

"Danny, from HL Bowman, quickly understood the scope of the installation and used his expertise to make the installation seamless. As a result, the filtration system he installed is now operating perfectly to remove particulates greater the 5 microns from our well water. I would highly recommend HL Bowman for your plumbing needs. "

"Eric L. from Sila arrived excatly on time at 8AM as promised. He provided me with a number of options, and I decided to have a new hot water tank installed (the old one was showing rusty water). He was able to have the replacement tank installed and working within a couple of hours."

"Replacement of 2 heating and a/c systems. Went very well. Professional, courteous, and thoughtful."

"When they called (after I assume HomeAdvisor contacted them), I was told it would cost $89 to come out to give me an estimate. I had no problem with that but tried to get some rough estimate on how much a straightforward replacement of faucet would cost - but no estimate. When the plumber arrived, he first tried to get me to join some membership in order to get some percentage reduction in the cost (but I still had no idea of that cost). Bottom line was that the cost was over $600 for one hour of work. I will add that the plumber did an excellent job so I have no issues with their work. It is more about how they charge for their work. Next time, I will either find someone that is willing to charge by the hour or is willing to provide free estimates."

Since our founding, ER Services Plumbing & Heating has been known for quality services, exceptional efficiency, and the highest level of professionalism. No matter what service you’re looking for, we guarantee to not only meet but exceed your expectations and ensure your full satisfaction. We have been servicing the Merrimack Valley and North Shore for 40+ years of combined professional experience. We excel in High-Efficiency Boilers, Water Heater Replacement, New Construction, Remodels, and Repairs. - Call today!\n

Village Home Services formally known as Village Electric and Village HVAC. We stand at the intersection of expertise and community spirit. With our plumbing, electrical, and HVAC services, we go beyond fixing problems; we enrich lives, one home at a time. In our village, your comfort and safety are our top priorities.

"

I have nothing but great things to say about the whole team I worked with at Boston Standard Plumbing. From the initial questions of 'should I install ductless A/C', to the first meeting and dealing with the staff at the office, who ensured appointments were scheduled in a timely manner, confirmed and always received a follow-up, to ensure my satisfaction.

 

During the time it took to install my system, the team members, were polite, timely, clean and ensured minimal intrusion to my home/work life.

 

Their electrician was able to make the smallest cuts necessary in my walls, which was easily patched and looks as good as new.

 

I highly recommend working with Boston Standard Plumbing & Heating and will use them for any/all work I need carried out in the future.

"

"So Many Problems!! (though they tried hard to resolve them) Do NOT make the mistake we did and let them talk you out of pulling a permit. The work by this contractor should definitely be inspected. MA Design quoted a low price, used cheap (Home Depot grade) materials, and relied on workers with limited English skills. Plumbing and carpentry were problematic, seemingly due to inadequate training for some workers, spotty communication and quality control from supervisors, and some sloppy attention to detail. We should add that our foreman, John L, and the workmen were willing enough to fix problems after we discovered them, though we had to pay for time and materials when we found MA Design’s quality standards to be unacceptable. The end result of the bathroom remodeling seems OK and we hope that no more nasty surprises turn up in the future. The two supervisors are generally courteous and anxious to please, but poor communication with their workers and sometimes with us seemed to be typical for this contractor. Here are specific examples of our problems: PLUMBING 1. The plumber (apparently not licensed) installed the wrong shower controller in the wall, tiled over the wall, then tried to hide this mistake by sticking on the control handle taken from the shower controller we had specified. Of course, the controller did not work properly and we discovered what had happened by poking through the unused shower parts and calling the manufacturer. To correct this error, MA Design had to cut a hole in the plaster wall of our hallway. MA Design did repair the plaster but now we have an additional painting job because of their mistake. 2. We also discovered that their “plumber” tried to attach the tub spigot to flexible PEX tubing rather than to a solid copper pipe anchored to a stud in the wall. The spigot worked loose in just a few days. No qualified plumber would have made such a rookie mistake. Repairing this error also required the hole in our hallway wall. Clearly, no qualified supervisor inspected the plumbing before the tile went up in the shower enclosure. 3. Just 2 months after MA Design wrapped up the work, we found a serious water leak coming from the ceiling below the remodeled bathroom. This ruined the ceiling and of course ruined the paint job we had just completed in the room below the leak. To their credit, the supervisor quickly came out, cut a hole in the ceiling, and replaced a flawed PEX tubing fitting with a quick-apply fitting to stop the leak. MA Design then cut away large sections of water-damaged ceiling in two rooms, let things dry out for a few weeks, and applied mold-kill spray to address the mold that had formed. It seems that a fitting on the PEX tubing was not properly crimped. This reinforced our belief that the MA Design workers doing plumbing on our job were not well qualified and that MA Design did not choose to or did not know how to inspect work adequately. Several weeks later, MA Design eventually had the joint repaired by a licensed plumber and repaired the holes in the ceiling. 4. The shower enclosure tiling was done OK for the most part but we found holes in the grout around some tiles. We suspect that the grout job was substandard for another reason: the grout sealing the tub to the floor is cracking and flaking after only 2 months. CARPENTRY 5. We replaced the bathroom window with a safety glass window but MA Design replaced the prior window trim and window sill with lesser quality trim and no window sill whatsoever. This was a complete mismatch with the rest of the house. MA Design quoted use of “standard” trim. If MA Design’s estimate assumed replacing trim with something so obviously out of place with the rest of the house, this should have been clearly stated in the quote. We ended up paying to rip out their trim and replace with trim that matched the rest of the house. In fact, the lumberyard’s “standard” trim exactly matched the trim elsewhere in the house so we felt that MA Contracting’s use of “standard” to describe their materials was deceptive. 6. They also installed a new window in an adjacent room. They made the exterior windowsill out of a very knotty piece of pine, inviting future rot. Even worse, no drip edge was cut into the underside of the sill, which could lead to water wicking under the sill and getting into the exterior siding. No well qualified carpenter would have made a mistake like that. PAINTING 7. MA Design did very little painting for us, just some primer application after drywall installation. Still, the workman on our job made a rookie mistake. He applied primer to a repaired ceiling with a rough wall roller and then applied primer to the doorway trim with that same roller rather than with a brush or smooth roller. The result: the formerly smooth doorway trim now had a rough, thick layer of paint that looked and felt awful. It took us 2 hours of sanding to restore the doorway trim to a smooth surface. This experience reinforced our general impression that many, if not most, MA Design workmen are not properly skilled or trained for the work they are doing. COORDINATION & COMMUNICATION 8. We agreed at the outset which fixtures were to be bought by MA Design and which by us, but MA Design sometimes bought the wrong items, which resulted in confusion and delays. In many cases, we ended up buying the needed fixtures ourselves just to keep the project moving. 9. On at least 10 days, workers were expected but none showed up and MA Design did not call to inform us of this in advance."

"Jacob arrived ahead of schedule and helped set up a short term solution to keep the water level down around our sump pump until installation of a new replacement could happen later in the week"