Get matched with top electric vehicle charging station installation pros in Milwaukee, WI

"Great- not a single complaint. I’ve started to use Current Electric for all our electrical work, and have never been unhappy. Will continue to use them."

"I was in a time crunch due to selling my house and repeat inspection. I had called at least ten electricians/contractors and this company is the ONLY company that followed through. Martin had arrived and promptly started working and then his partner even came to finish our house on the weekend. I cannot recommend this company enough. Great service and price, so thankful for them."

"Paul called me within two hours of submitting a service ticket. He listened to the issue I described and gave me a service date within 7 business days. Upon arrival, he identified incorrect wiring in regards to three pole switches. At my request, he made the outlet "hot" all the time and non-dependent upon the master and companion dimmer switches. He was able to access a junction box in our attic to re-purpose the existing wiring and was completed with all work in approximately two hours. He was kind enough to spend fifteen minutes providing free quotes/estimations for a couple other electrical projects that I've been thinking of (i.e. - piping more outlets in my garage, installation of a ventilation fan in a bathroom, etc). 10/10 would recommend for electrical work, I'll definitely be calling him again. I originally booked the first electrician that got back to me through Angie's List, but had to go with North Shore Electric because I was getting a Master Electrician at half the price. Paul is well worth the time and expense!"

"Tim was highly professional and punctual in fact they showed up an hour early. I wasn’t able to be home while Tim was performing the work. But he kept me in the loop the entire time. He advices a better alternative to solve my electrical outlet needs. Tim was very responsive with addressing all of the questions I asked via text leading up to the install day. Over the last couple of years I’ve had electrical work done by three other electricians two of which were good. Overall the level of service Tim provided was above and beyond."

"I couldn't be happier. From Mike the estimator, who first tried to locate the problem wiring but the wiring was about 60 to 70 years old. We knew it needed to be replaced. Mike was there about 2 to 3 hours and didn't charge us for that time. Our electricians, Kris and Adam were wonderful. Since I would have all ceiling boxes installed I was told I could have one in every room if I wanted. I had ceiling fans put up in the kitchen, dining room, living room and my daughters bedroom. All rooms but the other bedroom as no one stays in that room and I already had the light fixture. She got motion sensor closets that not only go on when the closet is opened, they are quite bright for her to see her clothes, which was a big problem for her in the past. The back hallway has always been an issue changing lightbulbs as it is a really high ceiling and very hard to change bulbs. They put in recessed lighting with LED lightbulbs that they say will last 50 years. They also put one of these recessed lighting in the kitchen in leu of the tulip light fixture that she had. They even fixed the outside lighting so when our dog goes out at night we can actually put a light on for him. (He is a black lab, very hard to see in the dark.) The whole job was completed in 4 days and they cleaned up great. I am very impressed and will definitely use them again."

"Outlet replaced without a hitch. Circuit found to be okay, it was just being overloaded with an A/C drawing too many amps."

"We are very please with the job done.
Horizon came to us on a recommendation from a friend in the Real Estate Business.
Even though we read a terrible F rated Angie's List review on Horizon we selected Horizon based on our friends advice because he had never led us astray before. We are glad we did.
Do you know how it is when you take your car to a mechanic to fix a certain and quot;thingand quot; that is happening and then can't recreate that and quot;thing.and quot; After the job was completed and Al, the electrician was taking us on an inspection tour, we turned on our second dehumidifyer on the other end of the basement only to have the circuit breaker pop---not the one just installed. After reset and turning off the dehumidifyer, the basement light brightned so we think we have finally hit and quot;paydirtand quot; in figuring out what is going on here. We were delighted that a certified electrician got to see this.
He explained that both of our dehumidifyers draw 7.5amps and the circuits are only 15amp so with a few light bulbs burning it can overload when the dehumidifyer kicks on. We will probably have him back to do another dedicated circuit, however, we will first check to see if we can purchase a dehumidifyer that does not pull so many amps. Maybe we are on to something here regarding lowering our electric bill and overfilling the landfill with old dehumidifyers (yes, I have a thing about that)

Roy Lamberty
Brookfield, Wi



"

"I have waited a few weeks before writing this review. I feel obligated to post this review. I selected Watry Homes because of their good rating on here and were the only contractor listed on the James Hardies website for my geographically area. Now I must add that after speaking to James Hardie personnel in Southern California their listing of contractors comes with a legal disclaimer. They, James Hardie can not guarantee the work of the listed contractors. So my question to them was why list any contractors ? They had no logical answer. Watry Homes was about 8/10 % higher quote than the other 4 I had received but because of the above mentioned facts I chose them.
 My disclaimer, I am only evaluating this one Watry Homes crew. I do not know if they were Watry employees or contracted personnel. They wore no uniforms and their vehicles had no Company markings. Nothing was out of code and they either fixed or offered to fix all the discrepancies, more about this at the end. The dumpster arrived a day before the work start date. The crew arrived on time but the acting Crew Lead said the normal Lead Man was under the weather. "No" Port a Potty was delivered. They promptly removed the old siding and began installing.  I began seeing overcuts at most of the finished right angle corners around doors and windows. I quickly took out my iPhone and took photos of a good number of the deformations. These overcuts are a result of using a hand circular saw ie: Skil Saw to do finished corner cuts. My siding is dark brown but the core material is white. So now you have a 1/8 to 1/2 cut in the top of the material exposing a white line. I sent Scott Watry many of these photos. He said they have always used circular saws. I have done most of my own work on all my homes but never worked with Hardie board. I sent an e-mail to James Hardie questioning this Skil Saw usage. They sent me an e-mail saying a Jigsaw should be used for the final inch or two of the cut. If a circular saw was used, the cutting should be done from the back of the material that way the small over cut would be on the back of the board and not seen. I sent this e-mail to Scott Watry. Watry's solution was to put an extra large amount of caulk over these overcuts while sealing the edges of all the windows and doors. They replaced a few of these larger overcut boards. All of the Butt Seam Flashing is white in color but my siding is dark brown, so now you have a white line visible on most of the Butt Seams. They had dark brown touch up paint and could have quickly put some dark brown paint on the Butt Flashing before installing in at the seams. Most of the Butt Seams are .050" but three are .100". There are a few locations were there are 3 to 4 Butt Seams within a 30 inch circular area. They could have planned the board layout better thus spreading these seams more evenly around the house. One point in particular, they had a 26 foot run of 1x6 horizontal Trim Board to run on the front of the house. So they started at the corner and put on two 12 foot sections finishing with a small 2 foot section by my front door. So now you have a seam but my front door. The better way would have been to start with the full lenght  section at the front door followed by another then the small 2 foot section at the corner of the house some what burried behind some bushes. Things like nail heads not flush, poor visual appearance of a lot of the caulk lines, etc. The soffit is another long story "mostly" fixed.
These are a good number of the lack of attention to details I found on this job, most of which I have photos of.  Scott Watry  asked me if I was 100% satisfied and I said no. To get it right would have required removing 1/3 to 1/2 of all the material and I would have to watch each cut and installation. I said here is your money, in full, you guys are done. Now the house looks pretty good from 5 to 10 feet away if you do not know what to look for.
On the day Scott Watry was coming for the money I found a vertical pencil line on a siding board by our back door. It was probable a cut line that was not used. I showed Scott the line. He said it should erase off. I gave him 2 erasers and he could not get the line off. He actually began removing the brown finish at which time I stopped him. He subsequently sent me a paint touch up kit and it covered the pencil line.
In a later phone call conversation Scott said I was "harsh" in my findings. Facts nothing but the facts with photos too."

Paul David Contracting is a residential and commercial electrical and remodeling company serving clients in Milwaukee and the surrounding areas. Paul and his experienced crew specialize in a variety of skilled electrical projects such as LED lighting, electric appliances, electrical devices, dimmable switches, kitchen and bathroom remodel wiring, exterior lighting, service upgrades and panel upgrades. Paul and his team are committed to quality and integrity ensures that the project will be done right the first time. Paul's five star ratings assure his clients are in good hands. Contact us today for more information!

"We used the coupon for their electric inspection service from Angie's list. Jason called twice to scheduled and rescheduled the appointment as he had to rearrange it for personal reasons. He was very polite and helpful with our questions. Our problem was solved when he found the right switch for the outlet. The coupon that included $75 for the work covered this inspection trip."