Get matched with top swamp cooler installers and replacers in Dedham, MA

"We have been loyal customers of Genove for years, but this year they exceeded any expectations. From the emergency service call on a cold Sunday night in February to the installation of the new furnace and hot water heater today. Armando and crew are terrific. Ryan, Richie and Shawn completed the project in less time than we expected. And, Armando assisted us in the HEAT loan program which has us paying for this work at zero interest over 7 years as well as handled the rebate programs. Highly recommend Genove!"

"He was timely, professional and responsive. He clearly knows the technical aspects of the trade and provided us with a lot of information about the equipment he would be installing and how it would work with our existing ductwork.  We did not care for his sales approach because he tried to sell us on things we did not ask for and did not need.  He tried to sell us on a humidifier for the system which we really don't need because we live right by the ocean where it is quite humid year round, even in the winter. Adding humidity to our house could cause problems with mildew or mold.   He also tried to sell us on replacing our hot water tank for a more efficient model even though ours is only 5 years old.  We got the feeling that he was trying to pack as much sales onto the heat loan program without really thinking about the customer's specific situation, and that put off me and my husband from wanting to work with him.  At the end of his sales presentation he decided on the spot he would give us an unspecified discount.  We did not like this high pressure sales tactic.  We had not received other quotes yet so we declined to decide on the spot.  He emailed us a couple days later offering a 10% discount if we decided by a certain date a couple days later.  We decided to wait beyond that date so we could get more bids.
Joe's quote was $2000 higher than a quote from another installer who has equally good reviews on Angies list.  Both quotes were to install the same equipment, however the second installer included the cost of converting two unused ducts into returns and installing a pass though in a ceiling to help balance our system.  I shared this information with Joe, and he responded by saying he would beat their price by $100.  It goes to show that it pays to shop around. 
As Airco's good reviews on Angies list attest and my interactions with him, I am sure they would do quality work, but my husband and I were totally put off by his sales and pricing approach and did not want to work with the company as a result.

"

"I needed to replace an older AC unit that is in a very tight spot in an attic. I had 4-5 people out to look at it and I thought Atlantic (Bill) was by far the most knowledgable and had the best understanding of what I needed, and did the best job explaining it to me. Their pricing was about the same as everyone else so that was the reason I went with them. After we scheduled the install I didn't hear from them until the day before (a Sunday) when I had to reach out to the office. But other than that the installation couldn't have been smoother. Kyle and his team were exactly on time each morning and were very nice and professional and got everything installed smoothly with very minimal need from me. Would definitely recommend."

Live Your Most Comfortable Life with a Company You Trust.\nWe offer Same Day Service and Next Day Installation!\n\nSila has been the center of delighting homeowners since 1989, with our team of engineers, certified technicians, and system designers that are proud to deliver the highest level of expertise in the HVAC industry. Whether it?s a repair, replacement, installation, or service, we have an unwavering commitment to keeping you and your family comfortable and safe ? season after season.\nWe guarantee satisfaction and are proud to have earned over 7,000 ?A? ratings on Angie?s List and its prestigious Super Service Award!

With over 75 years of experience, GEM provides trusted HVAC services for homeowners in Plymouth, MA and surrounding areas, as well as across Cape Cod. Our licensed technicians handle everything from AC and furnace repairs to system installations, maintenance, and emergency HVAC service.\n\nFrom keeping your home cool during humid Cape summers to ensuring reliable heat through the winter, we deliver efficient, dependable comfort solutions you can count on—day or night.

"I bought my unit from NETR in 2018. It worked fine until we discovered it wasn't blowing any cold air. I made the big mistake of hiring someone a family friend recommended and they diagnosed it incorrectly and then basically disappeared on me. Anyway, it took a few weeks but they repaired it today and I was impressed with their courtesy and getting the job done very quickly and successfully. I felt like I was being dealt with honestly. Thanks, Jared and Jack. I should mention I paid about $300 for the refrigerant today. I don't know what the final cost will be but probably a bit over $1000."

"He arrived earlier and took a full hour to clean and inspect the chimney which hadn't been cleaned in at least 25 years. The chinmay was oil then last yeara converted to gas. He said the chimney had only minor debris and recommended we install liner eventually and a better rain cap and also to add a clean out door.  He addressed why we could need a liner and what to do until we have a liner installed (ie carbon monoxide alarm on all floors).  All in all we are very happy with the service provided and the attention to detail with both the work done and talking about the liner, etc recommendations. We highly recommend Chimney Chap.
"

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"Excellent for maintenance service and emergency work. I subscribed to their maintenance service for several years before they raised the rate, and they always did fine work. When I switched to another maintenance company that missed a flaw in my furnace which caused it to fail on season startup, AccuTemp came out to diagnose the problem the same day with no contract, got the large expensive replacement part for free under warranty, and had it fully installed and working again within 2 calendar days. All that for just the cost of a day's labor!"

"Provider was very pleasant and arrived on time. He replaced our outdoor faucet and we upgraded to a frost free version. The water shut off for our faucet is inside the house, which created a little more work for the installer, but he was able to finish the install without an issue. Very easy transaction from start to finish. "