Top-rated swamp cooler installers and replacers.

Get matched with top swamp cooler installers and replacers in East Brookfield, MA

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Swamp cooler installers and replacers in East Brookfield

Dustbusters Duct Cleaning and IAQ Services LLC
4.9(
117
)

Serving East Brookfield, MA and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"After purchasing a home from a family with pets, i knew the ducts should be cleaned. One company blew me off after seeing how dirty the vents were after quoting nearly $1000 for their service and replacing my "coils". DustBusters came in a timely manner with their latest technique to clean. Vacuumes with brushes, most other companies use, leave a lot behind and is more work. DustBusters use a air hose system with a massive vacuum tied into the main ducts to keep it brief. Not only did a great job, but for half the cost of the other guys. The tech who came said my "coils" did not need replacing the other company tried selling me (big money). The owner's son came and was very professional and modest. Use DustBusters, worth every penny."
Recommended by99%of homeowners
Avatar for SuperiorAir Duct Cleaning
SuperiorAir Duct Cleaning
4.5(
573
)

Serving East Brookfield, MA and surrounding areas

In business since 2004

Free estimates

Emergency services offered

"There team did an amazing job, moving the dryer out, replacing tubes as needed, and going into attic, and outside to clean the vents, as well as thoroughly cleaning the inside of the dryer. Moved everything back perfectly, and left the place spotless. Dryer functioned 100x better."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+43

Recommended by87%of homeowners
Stephen Michael Demo and Disposal
5.0(
101
)

Serving East Brookfield, MA and surrounding areas

In business since 2001

Emergency services offered

"Stephen answered the phone directly when I called to make an appointment.  He said that he was available to come out that afternoon, if this was convenient..  I agreed, since we were home anyway because of power outages at work.  Stephen arrived as anticipated and spent a few minutes looking at the shed and its contents.  I also showed him an old exercize bicycle in the garage that I wanted removed.  He stated that he would e-mail me an exact estimate within a day or two, but anticipated the cost to be in the range of $800-$900.  I was somewhat taken aback by the amount since I had been quoted several hundred dollars less than this by the company I was planning to buy a new shed from.  I indicated to him that I would probably use this other company.  He said that he could take the exercize bicycle when he left, and proceeded to carry it out the garage and lift it into his truck.  He refused to accept payment or a even a tip for this.  The bike had been taking up badly needed space in our garage  for years, and for us it was extremely heavy (he hoisted it up with seemingly minimal effort...).  It may have been a small thing for him to do, but I was really appreciative.    If I need to hire anyone to haul away items in the future I plan on calling  Stephen."
Recommended by100%of homeowners
Avatar for North Alabama Technical Services
North Alabama Technical Services
4.9(
124
)

Serving East Brookfield, MA and surrounding areas

In business since 2010

Emergency services offered

Credit card accepted

"Jim is local.  It went great. Jim Ferrell is a professional of the highest caliber. Responded quickly, took care of my problems, and advised me as to better means of protection than I had. He came back a second time to uninstall software that I purchased that did not provide adequate protections and installed free software that would do the job.  He did the work through remote connection, but is available on site if necessary.
For those people needing help on getting red of malware, viruses , etc. on your computer,  Jim is local, better than all thse remote out of state location providers, is a mature, highly trained professional in this area.
If you go to local computer stores you get very young people that can do a basic job, but are no where near the professional level of Jim.
I highly recommend Jim to anyone that needs these type services.
"
2014 Super Service Award Winner!
Additional Photos
Recommended by97%of homeowners
Avatar for Pioneer Oil and Propane
Pioneer Oil and Propane
4.6(
19
)

Serving East Brookfield, MA and surrounding areas

In business since 1957

Free estimates

Emergency services offered

"The owner and customer service manager were both very responsive to issues raised during the installation of the system. They did everything they could to make sure I was a satisfied customer. The reason I could not give they company A's in the areas of quality and professionalism was the number of issues that needed to be raise during the installation and items they did not check out prior to leaving after the installation.
This company was chosen to install the system was because their quote was the most feasible placement of the oil burner, oil tank, vent system, and hot water tank received. Their price was comparable to other quotes.
This new system was purchased using a zero interest loan sponsored by the local electrical utility. Work was started after a credit check was run and an initial deposit was paid for items not not covered by the loan. The lead installer was knowledgeable and made me comfortable as the work started. We reviewed the work that needed to be done and work commenced. A team of four people began the install.
The first "issue" arose when they began to connect the hot water tank using 1/2" copper pipe. The previous system was connected to the house with 3/4". When this was brought this to the attention of the lead installer he was quick to call the office and get the needed materials and the water system was attached as requested with 3/4" pipe.
During the process of connecting the new heating system to existing piping, one of the workers incorrectly connected two pipes together and cause a water leak which damaged some materials in storage shelves. The owner was quick to compensate for the damaged materials.
At the end of the second day of installation the system was checked out and the workers left.
Soon after the workers left we discovered there was no hot water. The new system had a locked water mixing valve above the hot water tank. It was set to 70 degrees. I could have called the company, but chose to look up how to unlock the mixing valve and adjust to supply hot water to the house. I was able to adjust the mixing valve which allowed the tank to supply hot water to the house.
The installed heating system was a two zone system. Later that first evening one set of rooms were getting cold while the other set of rooms were getting hot. Upon further examination I determined the thermostats were reversed. After switching the two thermostat connections at the oil burner the room temperatures returned to desired temperatures.
When the hot water tank was first pressurized no water leaks was observed, however, during the next few days, a number of leaking joints were identified. A different employee install the plumbing of the hot water tank. It took another employee to arrive and take apart and reconnect the connections to stop all the leaks. I was told that the pipes were not adequately tightened at the first install. To the company's credit response time to my report of leaks was fast.
Two bills were received from the company for parts and labor to fix the water tank leaks. I called the owner of the company and the charges were reversed.
A few days later I noticed the circulator pump to the hot water tank was running and the boiler temperature was low. The house was not calling for heat. After some research I found that the boiler control unit was not set for an indirect water heater. So as long as the house did not call for heat, the oil burner did not turn on to supply heat to the hot water storage tank. The position of a switch in the control unit needed to be changed. Once changed the burner turned on supplying heat to the hot water storage tank.
The exhaust for the oil burner is out the side of the house using a power vent system. A few days after the install, I realized that the venting fan was running for an extended period of time (approximately 11 minutes) after the oil burner shut off. After reading the manufacturer literature, manufacturer recommends the vent fan to run for a period of 3 to 5 minutes after the oil burner shuts off. The run time of the vent fan was reduced from 11 minutes down to the 3 to 5 minute period as the manufacture recommends.
The oil burner purchased included a control unit that can be adjusted to provide increased energy efficiency. This feature was discovered as part of reading the control unit manual to solve the water heater - oil burner problem (see above). The company left the system where the control unit did not provide any added efficiency. After experimenting with the efficiency setting, a "good" trade-off has been reached between oil burner responsiveness and the house need for heat.
A few weeks after the install, the fire department came out the inspect the system. The system failed the inspection. The oil burner exhaust flue was within 18"  of combustible materials. Board needed to be installed above the flue pipe where the wood  floor joists were withing the 18" of the flue pipe. The company was quick to respond to the situation.
I am extremely happy with the new heating system, power vent, and hot water storage tank. I would have preferred not to have raised the issues and work thru the problems I had to with the install and start-up of the system. It is important to me to be associated with a company that will work thru issues and problems to satisfy the customer.
"
Ready for oil!
A new heating system!
Want a chimney?
Dave Brunell
Heating Oil

+2

Recommended by100%of homeowners
Avatar for Lend-A-Hand HVAC
Lend-A-Hand HVAC
4.8(
5
)

Serving East Brookfield, MA and surrounding areas

In business since 2021

Free estimates

"Mike was referred to us and we called him. Our boiler was not working. He came out a few hours later and diagnosed the problem quickly. The part's store was already closed however he was at our house the following morning and quickly replaced the part and the boiler works perfectly. I expected a whopping bill but I was shocked the bill was VERY reasonable. I would recommend Mike, in fact I already have. I will be a customer for as long as he is in business."
Furnace Change Out
Basement Run
Furnace Change Out
Basement Run
Basement Run

+15

Recommended by100%of homeowners
Avatar for Choice Home Warranty
Choice Home Warranty
4.0(
5,676
)

Serving East Brookfield, MA and surrounding areas

In business since 2008

Emergency services offered

Credit card accepted

"Technician came to the house and analyzed the problem. It was determined that the cost of repair was over the allowable Choice Home Warranty limit and it should be replaced. Choice Home Warranty issued their replacement cost. This cost was unacceptable and I challenged their figure. After some negotiation I was offered an increased settlement amount. I still balked at their offer but I was told to take it or repair my old microwave. I finally accepted their amount, even though it is still well below what it will cost me to replace the unit. I might add that the existing microwave has the convection feature and I want to replace with same features. The cost that I will receive also does not include any removal, disposal or installation costs. At this time I am debating whether I will continue with Choice Home Warranty or consider other options."
Recommended by82%of homeowners
Showing 1-10 of 29
FAQs for swamp cooler installation and replacement projects in East Brookfield, MA

Swamp coolers are quite energy-efficient, using only 15% to 35% of the electricity that traditional central air conditioning units consume. This can lead to significant savings on your energy bills. However, keep in mind that swamp coolers require water to operate and may not cool your home as effectively in extremely hot or humid conditions. When considering overall efficiency, it is essential to weigh both electricity and water usage, as well as the cooling needs specific to your local climate.

Evaporative coolers only work in dry climates because they cool by moistening the air. If the air is already moist, this will have little to no cooling effect. Central AC is a better choice if you live in a humid climate, such as the Midwest, eastern, or western coastal regions.

To install a swamp cooler on a roof, a local HVAC specialist will first find and cut a spot free of wiring and obstructions. They’ll then install metal bracing, legs, brackets, the ceiling duct register, ductwork, power, and thermostat wires. Once installed, they’ll seal all openings, attach duct connections, and install a thermostat. Before leaving, they’ll run cool water piping to the unit and inspect all the connections.

The cost to repair your swamp cooler ranges from $50 to $600, depending on the issue, whether new parts are needed, and the chosen repair service. Depending on the type of pad your system uses, you will need to change out the pads every one to three years for proper operation. When budgeting for the cost to repair a window unit, expect to pay around $230.

The U.S. Department of Energy states that swamp coolers can cool a single room by five to 15 degrees Fahrenheit. However, this largely depends on the size and installation method of the evaporative cooler. You can only achieve these results in a dry climate, such as the American South, as it’s easier to cool rooms in humid environments with central air.

Swamp cooler water usage varies depending on the size of the unit. Smaller evaporative units may use one gallon per hour, while much larger units could use up to 15 gallons of water per hour. Most homeowners can expect their unit to use between seven and 10 gallons of water per hour of usage.

The East Brookfield, MA homeowners’ guide to swamp cooler installations and replacements

From average costs to expert advice, get all the answers you need to get your job done.

  • Detail of a HVAC system outside a brick house

    The cost of replacing an AC unit fan motor depends on warranties, labor, season, and more. This cost guide covers everything you need to know about this HVAC part.

  • A boy changing thermostat’s temperature using a smartphone

    Budget for AC coil cleaning costs based on factors such as cleaning frequency, coil type, cleaning method, accessibility, ongoing maintenance, and more.

  • home air conditioner being recharged with freon

    Need an AC Recharge? Here’s how much it costs, what factors affect cost, and what to expect.

  • House humidifier on a return duct

    Wondering who installs whole-house humidifiers? Hire a licensed HVAC technician. Learn what they do, other pro options, and how to hire confidently