Get matched with top central humidifier installers and replacers in Hobart, WA

"My experience with Greenwood Heating and Air Conditioning has been entirely positive. From my free estimate appointment through finished installation, the process was seamless. Each and every representative of theirs has been exceptional. Trevor negotiated a very competitive, all inclusive price for the entire system and followed up on the day of installation to see how everything was going. The install was expertly performed by an industry pro, Andril, with 17 years plus experience. Follow-up has been exceptional. Greenwood Heating has earned my unequivocal recommendation."

"Crew was very prompt and professional. Took care to put booties on whenever entering the house and courteous of your needs. Very nice, professional installation and site picked up and cleaned after completion. Thorough walk through and explained any questions don’t hesrtate to call and they will be more than happy to come back out and help."

"I purchased a new Navien NPE-240A2 Tankless Water Heater and had it installed. I'm loving the new water heater. It replaces an old Noritz tankless that died just before this installation. The on-site estimate was what sold me. Ken went through all the details and answered a lot of questions from me. Zachary came out with Austin and performed the installation just like I discussed with Ken. Zachary kept me in the loop throughout the installation to ensure I was in agreement with how it was going. Zachary always had my interest at heart and ensured no corners were cut. The installation is much cleaner, and more correct than the previous tankless company did. Zachary even listened to my concern about the astectics of the exterior exhaust and quickly found an easier and cleaner looking way to address my concern. He also removed an old recirculation pump and replaced a new main house shutoff valve. The entire area was treated respectfully and left cleaner than they found it."

"Appointment was setup up quickly. Service provided two days after contact. David showed up promptly and was very courteous and professional. He discovered and resolved a significant problem with my HVAC system which was costing my hundreds of extra dollars a month on my energy bill. Also fixed the installation of my thermostat. I was very please with Airpro's service."

"They came out to fix the problem quickly, they were far less than any of the other companies, they sent out somebody that was extremely knowledgeable and he was very personable. I would highly recommend them after looking at no less than eight other companies for the same job. When I have my heat pump replaced, it will be through this company."

"Northwest expert was outstanding and delivered on the Tune-Up on my central HVAC just as they did on the installation 2 years ago. Virgil was thorough and professional!"

"Daniel and his assistant worked hard all day, even into the night in order to get the job done.  He was very responsive to my phone call and was able to schedule the job in a very reasonable time frame.  He had good suggestions as to how he could be of assistance while working on the insulation removal and replacement (mouse proofing, dryer vent, etc.) and we were very pleased with the outcome.  Our house has been warmer this winter as a result.
"

"I've used Seatown for several different service calls. By far the most major one was a partial rewire that replaced some knob and tube wiring. There are several reasons why I view the as an excellent company: - Their administrative and dispatch system is efficiently and competently run. Phone calls during business hours are answered quickly (I've never been on hold for more than a minute or so), they usually have good availability, and the phone operator takes plenty of notes during your phone call which are then communicated to your technician who then has ample context on your problem right up front. - All of the technicians I've worked with have been friendly, communicative, and professional. It always seemed like they know what they're doing. Also, they will patiently explain to you what's causing your issue and what they did to resolve it. - I want to particularly call out Micah, the technician in charge of my rewire project, who was outstanding. He initially came out to diagnose why a couple of circuit breakers were constantly tripping, and identified the need to rewire my garage, office, furnace, and one bedroom. He wrote me an estimate, which I later compared to other companies' and turned out to be quite reasonable. Between my shopping around and heavy holiday demand, it wound up being a few weeks before the rewire was completed. In the intervening time, the circuits tripped a few more times. When I notified Micah of this, he offered to personally come over to further troubleshoot the problem - on Christmas Day - despite Seatown being closed! Micah also found a way to complete the rewire with almost no interior drywall damage. Finally, he was particularly helpful in answering my many questions about my home's electrical system, both before and after the rewire. Micah's combination of professional competence and personal empathy is very uncommon and exemplary. If you hire Seatown for any major electrical work, try to get Micah as your technician. While I am overall very satisfied with Seatown, there are a couple areas that I think could be improved: - At one point between Micah's initial estimate and the start of the rewire project, the circuit connecting my furnace gave out. This was on December 23rd, and I was concerned about my house not having heat. I e-mailed Seatown's emergency mailbox requesting someone come out requesting emergency service, but did not receive a response until December 27th. The office being closed for the holidays is completely understandable, but if you're going to have an emergency mailbox then you should be able to respond to it promptly 24/7, or at least have some kind of auto-reply that sets expectations on when a human can respond. - For relatively minor calls, their service visit fee is quite inelastic relative to the work that is actually done. By which I mean, I've paid about $300 every time they send an electrician out (other than the rewire), regardless of whether they did significant work like replace damaged, bare wire in my breaker panel, or just tell me not to use a space heater. It probably evens out in the long run, but each service call is a bit of a crap shoot on whether I'm going to feel like I got my money's worth. It seems to me to make more sense to charge a lower up-front visit fee, but then charge additionally for specific services rendered."

"They scheduled the service for the next day, since they would be in my area. Simon was very good. He texted me to let me know his expected arrival time, which was exactly as agreed. He explained a possible add-on - cleaning dust from inside the furnace - but didn't pressure me to do it (but I decided it was a good idea). He was very thorough in checking all the vents inside the house. All in all, a pleasant experience, and I'm sure I will use their services again."

"The installation of our new heat pump was to take two days, and I assumed would be done during normal business hours (8:00AM - 5:00PM). I expected a smooth process and a properly working system at the end of the 2nd day. The experience was not even close to my expectations. Day 1: Old air handler, heat exchanger, compressor pad and compressor were removed; new air handler, heat exchanger, and compressor pad were installed. As expected, the new compressor was placed on the pad, but not connected to inside unit. I observed one of the four-man crew scraping gravel from my neighbor's driveway to put under the compressor pad. When I told him that my neighbor probably would not like that, he said, "It will be OK. I'll smooth out the places I took it from." He couldn't have given a more wrong answer! Late in the afternoon, the electrician (an Overlake subcontractor) arrived to hookup power to the new system, and all four from the installation crew left. (I think at least one of the crew should have stayed until the electrician was finished to verify that the system was working. And maybe to explain to me how to operate the new thermostat!) About 90 minutes later, the electrician was finished, but the system would not turn on. It was not his job to troubleshoot system problems, but with the guidance of someone over the phone, he managed to find two wires that had not been connected by the Overlake crew. He connected the wires, but that made no difference. I was supposed to have backup electric heat working at the end of Day 1. This was important because it was December and the temps were down to 32 degrees at night. After 2 hours of trying to get the system to produce heat, the electrician left at 7:00PM, and an Overlake tech arrived at 8:30PM. At 10:00PM, the tech determined that a circuit board in the air handler was defective, and a new one would have to be obtained and installed in the morning. I managed to get by with two 1500-watt space heaters by closing off most of the rooms. Day 2: Before the techs arrived, I noticed that the compressor pad, with compressor installed on it, was significantly out-of-level. The techs arrived at 10:30AM, and I asked them to purchase a bag of gravel to replace what had been taken from my neighbor’s driveway, and they complied with my request. I also asked them to level the compressor pad which they did. The defective circuit board was replaced, and backup electric heat came on. It took two Overlake techs until 7:00PM to connect the inside and outside units of the heat pump, and attempt to charge the system with refrigerant. However, a valve on the compressor unit was leaking so the heat pump could not be operated until a new valve was obtained and installed the following day. Day 3: Two Overlake techs arrived at 1:30PM, and, I assume, they installed a new valve. What appeared to me that was left to be done at that point was to charge the system with refrigerant, connect a small electrical cable between the inside and outside units, insulate the refrigerant lines, and spot-tie the lines and wires into a neat installation. This seemingly small quantity of work took until 10:00PM to complete, at which time it appeared that I had a working system. Day 4: I had programmed the wi-fi capable thermostat using the owner’s manual on Day 2, so I woke up on Day 4 to two emails from the system telling me about urgent notifications that had occurred in the middle of the night. They were Error Code 99’s – High Torque Lockout. A google of this returned a manufacturer’s document that explained this code was likely due to overcharging the system, and resulted in the compressor shutting down for a while and then restarting for a couple of hours when the error situation occurred again. I called Overlake and they said to run the system only on the electric backup until a tech could come out 4 days later. I think Overlake should have sent a tech out that day since, at that point, they were already two days late providing me with a working system. Also, since my old but still working heat pump had been turned off 3 days before, I was going to be using electric backup for 7 straight days (at least), and that more than doubles my heating bill, at this time of year. Days 5 thru 7: Waiting for tech to return and troubleshoot error code. Day 8: Appointment for tech was scheduled for between 11:00AM and 1:00PM. Tech arrived at 4:00PM, but did call to say he would be late. Between 4:00PM and 10:00PM, the tech removed the refrigerant from the system and then recharged the system with refrigerant. He had determined that the initial charging had been below spec (too little refrigerant was used), and he said that the system should work OK now that it was properly charged. After the crew left, I noticed that there was dirt, installation scraps, and some kind of cream-colored lubricant on the carpet next to the air handler, as well as trash in the crawl space and outside around the compressor unit. In general, they could have done a better clean up. Also, they apparently used the top of our clothes dryer as a work bench since there was a drop of dried, blue PVC solvent on the dryer along with many dirty finger prints. The system has now operated for 5 days without any obvious problems. I now have an installed and operating system; however, given that it arrived from Bryant with two faulty components, and the installation included two wires not connected and improperly charging of the system, I have little confidence in my new Bryant heat pump. However, among all the negative aspects of this project, there were a couple positives: Overlake’s price was almost $2000 lower than their competition, they promptly submitted the necessary data to Bryant for the rebate I was due, and they appeared to provide a neat and proper installation."