Top-rated sewer main clearers.

Get matched with top sewer main clearers in Melrose, MA

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Sewer main clearers in Melrose

Avatar for Jeff's Drains
Jeff's Drains
4.9(
338
)

Serving Melrose, MA and surrounding areas

Approved

In business since 2001

Free estimates

Emergency services offered

"Unbelievably great service! My regular guy was injured and couldn’t do the job so I used Home Advisor. Jeff contacted me in a flash, gave me a price and I scheduled the job with him. I asked him to let me know when they were on their way so I didn’t have to stay home from work and he texted me right on schedule. Kyle came to do the dirty job - neat, clean, patient and friendly. And the best part? He cleared the roots in my sewer line and I can return to normalcy. What a relief! Guys I hired before left a big, nasty dirty sewage mess and Kyle left me zero to clean. Literally nothing to clean. Don’t hesitate to hire these guys. They won’t disappoint!"
Response time4 hrs
5 neighbors recently requested a quote
Recommended by98%of homeowners
Avatar for RezySave Plumbing and Heating
RezySave Plumbing and Heating
5.0(
13
)

Serving Melrose, MA and surrounding areas

Approved

Warranties offered

Credit card accepted

Offers commercial services

We are a family owned and operated company that values honesty and integrity and treats your home as if it were our own. Our services are customized to the individual project, paying close attention to the details of each project that we're involved with. We pride ourselves on the quality of our work as well as our commitment to outstanding results. We look forward to building lasting relationships and guaranteeing your satisfaction!

Water heater install
Hybrid water heater
230 neighbors recently requested a quote
Avatar for Heavy Doody Plumbing & Heating
Heavy Doody Plumbing & Heating
4.9(
19
)

Serving Melrose, MA and surrounding areas

Approved

In business since 2013

Emergency services offered

Small jobs welcome

We're dedicated to providing our clients with the very best in service, installation and repair to meet your plumbing needs. We specialize in mechanical piping and a variety of residential and commercial services. We take pride in the attention to detail put into each of the projects we're involved with. We're known for our quality work and the integrity of our business. We look forward to building long-term relationships with our clients and guarantee your satisfaction.

back flow  for sprinkler sytym
2nd meter install
finish
finish
finish

+26

Response time4 hrs
4 neighbors recently requested a quote
Recommended by94%of homeowners
Avatar for Spencer Home Services
Spencer Home Services
5.0(
22
)

Serving Melrose, MA and surrounding areas

Approved

Super Service Award Winner

In business since 1980

Free estimates

Emergency services offered

"This was an emergency service call. Main water supply pipe from street to our house had failed. They responded to call within 45 minutes, evaluated issue, gave us price, Within another half hour equipment showed up. Staff was friendly professional and efficient. Start to finish from initial phone call to replaced main with running water re-established was just over 4 hours. Really impressive company with great customer service. Thank you!"
Repairs
Under Slap Installation
Equipment
Equipment
Equipment

+9

5 neighbors recently requested a quote
Recommended by72%of homeowners
Avatar for Sila Heating, Cooling, Plumbing and Electrical
Sila Heating, Cooling, Plumbing and Electrical
4.5(
5,208
)

Serving Melrose, MA and surrounding areas

Approved (Corporate)

In business since 1989

Free estimates

Emergency services offered

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+6

Response time2 days
59 neighbors recently requested a quote
Recommended by85%of homeowners
Avatar for Mac Home Services LLC
Mac Home Services LLC
5.0(
10
)

Serving Melrose, MA and surrounding areas

Approved

In business since 2018

Free estimates

Credit card accepted

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business! Book with us online or feel free to give us a call today!

Bathroom vanity update
Bathroom vanity update
Bathroom vanity update
Bathroom vanity update
Bathroom vanity update

+6

Response time8 hrs
Recommended by30%of homeowners
...
Showing 1-10 of 440

The Melrose, MA homeowners’ guide to sewer main clearings

From average costs to expert advice, get all the answers you need to get your job done.