Get matched with top water or fuel tank remove pros in your area

"Very professional staff and maintained site of digging back to normal with seeding. Cleaned up everything they did."

"EMA is definitely a very good and reliable company. Just had oil tank removed and although there were unexpected additional charges because of a small hole in tank, Mike was very nice and explained everything. Just wished DEP was not so strict because they cost us an additional $1900 even without any contamination. I picked this company because it had very good reviews not just for their professional service but they are a lot lower than all the other companies I looked into. Our first estimate was $1,400 more than EMA!! I called several companies and I am so glad I went with them."

"We had a backup in the kitchen sink, so I checked on Angies list and was given about 5 choices. Rapid Repair Services had good references. Joseph came and after checking the sink and plumbing explained what had to be done. He was very efficient an friendly. Joseph cleared the problem and cleaned the mess from the back up.I'm highly satisfied with the quality,and cost of the work that was done. I will recommend Rapid Repair and Joseph to anyone who needs a Plumber. Roy J."

"Came early finished early and everything has gone well so far."

"Great experience!! FIVE STARS ALL AROUND! Sterling Environmental Services removed two 275 gallonn fuel oil tanks from our home in Randolph, NJ, in accordance with EPA, NJDEP, and local regulations and recommended procedures. Nick was very diligient with permits. Sterling coordinated the permits with the township The tanks were properly cleaned and removed. Tanks were cut up and left for the inspector. Inspector approved and they removed the pieces immeadiatly. Completely seamless from a customer perspective. THANK YOU very much Sterling Environmental!!"

"Honest, professional and prompt. "

"I'm writing this review before the work is even done, this says a lot about Justin and his crew. they are rebuilding my office/laundry room, yes that's correct I work in the laundry room :). it was in bad shape built in the 40's and was one big Draft with terrible windows, walls and doors. MAN these guys came in and gutted the place in one day and after 3 days we are 75 percent done, see pictures below.. had a bathroom done took 2 months, looks like I'll be done with in days.. JMW's crew is something I have not seen in a long time..they are persistent, so far doing GREAT work and most of all I have seen Justin at my site so many times to make sure it's all moving along. you don't see this type of dedication and quality work any more, everyone is give me the money and I'll get it done when I get it done.. NOT JMW these guys work and work hard..my new contractor for sure. PS don't let the age fool you Justin is the real deal. I'll post the finished product."

"This past weekend I had a bad experience. The short story is that an A. J. Perri technician diagnosed my furnace problem and wrote me an estimate for $1,600, parts and labor. It turns out my furnace had a different problem that required no parts and only 15 minutes of labor. Here are the details: This past Saturday my furnace stopped heating my home. I called A.J. Perri and they sent out a technician on Sunday morning. The tech ran some checks and concluded that my “inducer assembly” had to be replaced. Parts and installation would be $1,600. He said someone from the office would contact me on Monday and let me know when they could have the part. He also said that he couldn't be certain that there weren't other issues that wouldn't be found until the inducer was repaired. After the technician left I did some searching on the Internet. YouTube and Reddit were especially helpful. I discovered that the problem was that the condensate drain was clogged and water had backed up into the inducer assembly. The water prevented the pressure switches from detecting that the inducer was running and this prevented the furnace from starting. When I disconnected the condensate hose *2 quarts* of water drained out of the inducer assembly! This water was supposed to drain into a small pump unit on the floor that sends collected water to the sump. Over the years mold and algae had clogged the condensate trap and caused the backup. I disconnected all the hoses and removed the trap. I blew out the trap (making a mess) and confirmed that water would easily flow through it. I put it all back together and the furnace is working fine. The sad lesson here is that you can’t always rely on supposed experts. The good news is that the Internet can be your friend. Even more details: The original symptom was that the furnace would start up, the inducer motor would run for about 20 seconds and then it would shut off. This cycle would repeat every few minutes. Every few hours the furnace completed the startup cycle and then I’d get heat. Then it would stop heating for hours, and the indoor temperature would drop to the low 60s. What I learned from YouTube is that there are multiple stages for furnace startup. The inducer motor spins a cage that sucks in fresh air for combustion, and then pushes the hot gases through the heat exchanger and out the flue. Each stage in the startup has safety checks. The furnace will not ignite if the pressure sensors don’t detect that the inducer motor is working properly. Water is a byproduct of the combustion. It starts as a vapor but then condenses in the flue pipe and drains back to the inducer assembly, where it’s supposed to run through a hose to a pump that sends it over to my basement sump. The furnace is 14 years old. Apparently that’s long enough for mold and algae to clog the condensate trap and cause water to back up into the inducer. The 2 qts of water blocked the pressure sensor switches and so the furnace wouldn’t light. Final thoughts: For over 14 years I've had great experiences with A.J. Perri. They replaced my home’s original furnace and Air Conditioner units. They moved our outside A/C unit to the side of our house so we could have more quiet in the backyard. I had them come for periodic heating and A/C maintenance checkups. My impression is that they might cost a bit more, but they were reliable. I'm saddened that I need to post such a negative review."