Get matched with top swamp cooler installers and replacers in Norton, MA

"They were extremely responsive and professional. Someone was dispatched to my home within 24 hours. He accurately diagnosed the problem - that the condensate pump had failed and needed to be replaced. He offered to replace it immediately because he had the part on his truck. The price quote ranged from $1350-$2100 depending on length of warranty I preferred. This seemed extremely high because I had the part replaced once before 3-4 years ago by another company for approx $400. I mentioned that to the installer; he indicated that the price was the price and he was sorry he couldn’t lower it. I found the identical pump online for prices ranging from $35-$75! It looked like an easy swap, so instead of paying Rodenhiser, I ordered the part from Amazon, received it the next day. I have zero experience or training and was able to swap it and fix the problem in literally 10 minutes. I understand that service companies need to charge for labor and mark up parts costs, but a repair I could do in 10 mins for under $50 should not have carried a $1350+ price tag! This was very disappointing, and I will not use them again."

"Replied quickly, had lowest quoted price (significantly lower than my other quotes), did a really nice Roth tank installation in a tough spot, did NOT price gouge me for some extra piping that was needed, on time, cleaned up after work was completed. Solid A rating from me, I would recommend his services if your in need of an oil tank replacement or upgrade."

"They first came out to do a routine check and informed us of what we should / needed to do to have our fire place perform better. The quote they provided was very reasonable. We decided to install a rain cap after the sweep and getting an appointment was very easy. The technician arrived early and completed the work quickly."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"New faucet has been installed an inch or so too far outside. The two securing screws could be driven into the wood by a few turns only."

"There team did an amazing job, moving the dryer out, replacing tubes as needed, and going into attic, and outside to clean the vents, as well as thoroughly cleaning the inside of the dryer. Moved everything back perfectly, and left the place spotless. Dryer functioned 100x better."

"If you need a reliable plumbing, HVAC and electrical company then I highly recommend Boston Standard Company. I have a 5 zone heating system and a 3 zone cooling system, so a lot of moving parts. From setting up my appointment to having Brandon the technician arrive at my home, the process was easy and hassle free. When Brandon arrived , he talked me through everything, including getting me ready for my eventual replacement. I know we all want to hold our systems together with duct tape and prayer, but I know the day is coming where even God himself couldn’t get another year out of my AC. All my options were explained to me up front, and the price was agreed upon to perform the work. Brandon did great work! Yamira in the office was great! Happy I called!"

"Mr. Ferrell first connected his computer to my computer via internet and worked for quite a few hours trying to determine what exactly was wrong. The next day he continued working from his computer for several hours. He determined he would have to have my desktop tower to complete the repair. He and my son met in Huntsville to exchange the tower. He then cleaned up a lot of what was wrong and reloaded Windows 10. He deleted the D: drive which had way too much memory allotted to it. The tower was returned and I plugged it all back together and it is working better than it did when I first purchased it. I would use him again and I recommend him highly to anyone needing computer updating and/or repair. His work is warrantied and he is very personable, knowledgeable, and helpful."

"My furnace was not working and was in a crawl space with a dirty, wet floor. Neither my propane gas company or a plumber would touch the situation until I contacted someone to pump out the crawl space. While I was waiting for another company (supposedly offering half hour response time but never showed), Sean from All Phases Mechanical ventured down into the mess, found out what was wrong and fixed the problem. I had been told it would be impossible to get this situation resolved today by others, but Sean simply set to work and got the job done. The price was extremely reasonable, the service quick and outstanding, and the company was represented unbelievably well by Sean, the tech sent out to help me. I could not recommend this business more highly. And I will sleep with heat tonight. My condo trustee was on site when the work was finished and plans to use All Phases Mechanical to resolve another problem
"

"Ed came over on time and began painting. Everything went great, including darker colored rooms that can really show streaks and white spots if done improperly. He was very easy to work with and I would recommend him again.
Ed's prices were also very reasonable compared to other providers. We were quoted at least 2x by other providers that did equal or less in work quality for other work we had them do.


"