Get matched with top heat pump installers and replacers in Norwood, MA

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"Jared showed up on time and went right to work. Installing the back up water powered sump pump and new sump pump seemed quite involved to me, but Jared said it would be no problem to do it. I am completely satisfied with their service, and responsiveness. H. L. Bowman is now the only plumber I will use for all of my plumbing needs."

"It went very well! Dylan was knowledgeable about removing our old oil burner that had died, and installing the new heat pump unit! The work was done in a timely fashion and he removed the old heater and cleaned up everything from the new install. He also followed up after a few days to make sure everything was okay, which it was. I would recommend Venture Mechanical to anyone of my friends, and will use them in the future for routine servicing on the system and for any other HVAC needs I may have!"

"This was a home improvement project that exceeded our expectations in every way. The experience and expertise of the NETR team was clear from the start. The interior design and structure of our house presented some uncommon challenges for laying and running the conduit through the basement and up to the 2nd floor. We are very satisfied with the results, both inside and outside. The team was able to match the color of our siding. The location of the external compressor and the three conduits on the outside walls fit well into the exterior of our home. The A/C units are quiet and the air filtration and cooling performance are great. Adam and Jim were the install team, they were excellent, professional and did a nice job explaining how to operate and maintain this Mitsubishi system.
"

"8-26-21 We highly recommend Pro H&C for installation of a ductless cooling system. Sean Pike (owner) was thorough in explaining the product we selected (Fujitsu), and gave us the most reasonable estimate for installation (we had no additional costs added to the final bill). The installation was done in record time considering 1) the demand for installation because of heat waves this summer, and 2) availability of the product. Workers installed and adjusted the unit in just a few hours, and cleaned up the site thoroughly. We were highly satisfied and want to acknowledge his professionalism and standards for business practice."

"Brian and his crew were great. Brian came out and gave a great estimate for everything I needed. He was very responsive via email as we worked to schedule a time for his crew to come do the work, which was mainly water tank and heating system maintenance. Brian brought Jim promptly and explained the work. They then pointed out a couple of things that they recommended replacing, one they just included in the original cost estimate and another they added on due to additional parts being purchased. Jim was very thorough and professional and, by all accounts, did great work. I’ll be using Heavy Doody for all of my future plumbing and heating needs!"

"SumZero Energy Systems have been excellent in the last several months with supporting the replacement of my air conditioning system in my old condo as well as servicing my furnace. A price comparison with other local companies also prooved SumZero Energy Systems offered the best price. When I purchased a home a few months later, I called them to take a look at my air conditioning system and furnace because I felt as though they had provided such excellent service in the past. It was a no-brainer to ask for consultation regarding the heating and cooling systems in my new home! When I contacted them for assistance or consultation, they are usually quick to respond and provide appointment times had a very convenient window! They have shown up on time to all of the appointments I have had. David S. has always taken the time to explain everything thoroughly and answer all my questions. I highly recommend SumZero Energy Systems!"

"Not easy finding an HVAC company willing to install a gas steam boiler. These guys did it all and did it well, removing the old oil burner and oil tank, installing a Weil McClain boiler including steam piping and hot water, installing gas piping, electrical and plumbing, including all inspections, even leaving me a temporary hot water heater until the furnace installation was completed. They fully accommodated my schedule as well. The town electrical inspector who came after installation was complete confirmed their good reputation."

"Applied for 0% Mass Save heat loan with Addarioâ s Services, and now have a Bosch Bova1.0, 18 Seer heat pump installed today 2-19-21. The only slight glitch was waiting for two parts to modify my old Thermo Pride oil furnace to make it work correctly. I highly recommend Addarioâ s Services for a prompts accurate estimate, installation, and very friendly customer service."

"This kind technician came out to check my AC found that the compressor wasn’t working and noticed that the unit was burnt out but compressor is under warranty and are going to replace it 100% fabulous work done by my young gentleman here and the backing is 100% 100%"