Get matched with top faucets, fixtures and pipes repair or replacers in Salem, NH

"We reached out to Matt regarding a leak in our downstairs bathroom and issues with the drain. It was a bit difficult to find someone willing to squeeze us in on short notice but he worked with us and stopped by the very next day. Not only did he resolve the issue but he also replaced our dated cast iron tub which we had been wanting to do since purchasing the home. He works very efficiently while also paying close attention to the smallest detail and making sure to address all questions and concerns. I would %100 recommend his work without hesitation."

"The company name is certainly an understatement. Great job. Very accommodating and conscientious. Will certainly use Stephen again for any plumbing needs."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"After an initial mixup about date and replacement faucet requirements, all went very well. Mike was prompt and prepared on the day work occurred, worked efficiently, knew code issues and how to resolve. His work passed inspection without issue. He was open and fair about price and costs. I'll happily call on him again."

"The Daigle plumbing tech arrived on time, worked hard to diagnose the problem. There were a number of unusual issues that he worked through to make the repairs and he returned my boiler to good working order. The first HVAC companyI hired made repeated trips and was not able to correct the problem. Would definitely recommend Daigle Plumbing to others."

"I had a leak in my water main coming into the house in my crawl space. I called 2 local firms without being able to have so one come help. Linda from Mr.Rooter called me back within 10 minutes and scheduled a plumber for the next morning.Brian arrived by 11am accessed the situation gave me an estimate and was able to repair the leak. Very professional, courteous and timely. I still have not heard from my local company ! Very nice to have water again. I will use them again."

"I had a great experience with this plumber! He arrived right on time and was very professional and friendly from the start. I had a leak in the plumbing in the wall between the bathroom and the bedroom and he took the time to explain exactly was going on. He even went under the house (in the cold and dark) to inspect the issue further and took pictures so I could clearly see the problem myself. He explained the repair in a way that was easy to understand and fixed the leak quickly ad professionally. I really appreciated his honestly, communication and the quality of his work. Everything is working perfectly now! I definitely would recommend him and would happily call and refer him if I ever need a plumber's help!!"

"Working with LPH was very simple. Dave showed up on time for appointment for the estimate. Brian and Denny showed up on time for the install and worked non-stop until the job was done. They had to trouble shoot some issues due to the older house construction but it all worked out well. They did very nice work and were open to my requests. I would definitely recommend LPH."

"When they called (after I assume HomeAdvisor contacted them), I was told it would cost $89 to come out to give me an estimate. I had no problem with that but tried to get some rough estimate on how much a straightforward replacement of faucet would cost - but no estimate. When the plumber arrived, he first tried to get me to join some membership in order to get some percentage reduction in the cost (but I still had no idea of that cost). Bottom line was that the cost was over $600 for one hour of work. I will add that the plumber did an excellent job so I have no issues with their work. It is more about how they charge for their work. Next time, I will either find someone that is willing to charge by the hour or is willing to provide free estimates."

"Village Home Services understood our unique need, set a fair price and showed up ahead of time. Communication was great throughout. Their technician, Scott took his time to carefully assess and carry out the job. The result was exactly what we needed. We are very happy with the outcome!"