Get matched with top heat pump installers and replacers in Wakefield, MA

"I highly recommend J. Griffin Heating and Plumbing for any install, repair or maintenance needs you may have. Jeff, the company owner, and his team recently replaced my very old home heating system with a high-efficiency boiler. I placed a request through Home Advisor and received a call back from Jeff the very next morning. Jeff was at the house that evening and spent an hour or more with me explaining my options in detail and answering all of my questions. I inherently knew, from that meeting, that I was dealing with an honest guy. He spoke with pride about his family and that his wife and boys are key to the success of the business. I expressed to Jeff that I was concerned about the safety of my current furnace and wanted to get it done as soon as possible. They made room in their busy schedule and were at my home, ready to go, within a few days. They were clean, neat and caused very little disturbance to me and my family during the install. Jeff and the guys were friendly, polite and conscientious. When the job was done, Jeff took the time to educate us on how the the system works and what to look for. Sandy runs the office and was very helpful with the entire processâ ¦.from scheduling the initial appointment to getting the contract together to helping me through the rebate process. Top notch service. It was just a great experience from beginning to end. You cannot go wrong hiring these guys. They are the best."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"In January, Jeff came to service my boiler, which had been shutting off randomly and required several resets. He broke the bad news that the boiler would need to be replaced relatively soon, but understood my need to plan for it and was helpful in providing information without "mansplaining." He talked through options and answered questions. When I was ready, I didn't hesitate to go with Jeff and crew for the replacement job. The quote was fair and I trusted him and his team to do right by me for such a big investment in my home. The system that was installed is practically a work of art! They even tucked the new water heater around the corner from the original spot, creating more space in the main walkway area of the basement. They were communicative, prompt and cleaned up after themselves. It's been 3 months and the new system seems to be working beautifully. Looking forward to seeing how it performs and saves on heating costs during the colder months. I'll keep calling Griffin Heating & Plumbing for all of my needs."

"Went very well. He was very responsive, came quickly, and was profession and fully prepared for the job. I found that the disposal had a slow leak the night before, called the next morning and described the issue. He fit me in within a few hours and arrived with a replacement disposal in case mine could not be repaired. He showed me how the old one corroded, why it couldn't be fixed and then replaced it. He also checked out another faucet that turned out not to need repair, but was kind enough to clear a partially the sink in the process. The new disposal works great. I would call him again if I have a plumbing issue."

"Morris Heating and AC provided service that should serve as a model for all other service providers. They were consistently professional, efficient and response, ultimately installed a system at a very good price and did so urgently as we were entertaining guests from out of town. From the front office (Heather and Kaitlin) to the service manager (Greg) to the individuals who actually did the work at the house - beginning with Julin, then Blaise and finally Christos who actually installed the system, I interacted with very pleasant and effective people."

"Joe, the AirCo sales representative, was very professional. He actually asked for my feedback on priorities for a new boiler. This was important to me because the boiler sits below our family room, and the noise level of the boiler was as issue. His proposals listed several boiler options, based on heating efficiency, which were competitively priced. The installation was run by Steve, who was able to fit in the installation the next week. Steve, and his crews, were punctual and courteous, and the installation went smoothly. It's only been a week, but I am very pleased with my Bosch boiler, the quality of the work, the price paid, and the timeliness of the installation."

"Service was great my install was done much earlier they original scheduled and that was great.
Adam the installer and Jay the electrician they use where great did good work where quick and very respectful of my home.
Would definitely use them again.
"

"Unique replaced my 20 year old high velocity air handler, condenser, and separate mini-split systems. Overall everything looks and works great! I was impressed by the dedication of their team - working in my attic in 95 degree heat, installing a smart thermostat for me, and even removing/killing a giant wasp nest that was in the eaves! They also accommodated my request to remove the condensers a few weeks before the new install, so I could do some landscaping work. Price was also quite reasonable. Definitely recommend."

"William installed an EV charger at our home, and we couldn't have been happier. He was friendly and communicative, explained everything super clearly, and did a great job. His pricing was transparent and reasonable, definitely in line with other electricians we spoke to. We'll definitely be calling him again in future!"

"Brian and his team were amazing to work with, very responsive, and extremely knowledge in hooking up the gas for our heated pool. We would recommend them to anyone looking for a gas or plumbing professional!"