Get matched with top heat pump installers and replacers in Plainville, MA

"Jared showed up on time and went right to work. Installing the back up water powered sump pump and new sump pump seemed quite involved to me, but Jared said it would be no problem to do it. I am completely satisfied with their service, and responsiveness. H. L. Bowman is now the only plumber I will use for all of my plumbing needs."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"8-26-21 We highly recommend Pro H&C for installation of a ductless cooling system. Sean Pike (owner) was thorough in explaining the product we selected (Fujitsu), and gave us the most reasonable estimate for installation (we had no additional costs added to the final bill). The installation was done in record time considering 1) the demand for installation because of heat waves this summer, and 2) availability of the product. Workers installed and adjusted the unit in just a few hours, and cleaned up the site thoroughly. We were highly satisfied and want to acknowledge his professionalism and standards for business practice."

"It went very well! Dylan was knowledgeable about removing our old oil burner that had died, and installing the new heat pump unit! The work was done in a timely fashion and he removed the old heater and cleaned up everything from the new install. He also followed up after a few days to make sure everything was okay, which it was. I would recommend Venture Mechanical to anyone of my friends, and will use them in the future for routine servicing on the system and for any other HVAC needs I may have!"

"This kind technician came out to check my AC found that the compressor wasn’t working and noticed that the unit was burnt out but compressor is under warranty and are going to replace it 100% fabulous work done by my young gentleman here and the backing is 100% 100%"

"Philip and his crew did such a wonderful job installing a new heat pump system in my home, I later hired them to install a power vented hot water heater. Philip and his crew did an excellent job, which included venting the unit up directly through my roof (since venting out the side of the house was not an option). I have great trust and confidence in Philip and his crew. They are timely, professional, skillful, and know what they are doing."

"They were extremely responsive and professional. Someone was dispatched to my home within 24 hours. He accurately diagnosed the problem - that the condensate pump had failed and needed to be replaced. He offered to replace it immediately because he had the part on his truck. The price quote ranged from $1350-$2100 depending on length of warranty I preferred. This seemed extremely high because I had the part replaced once before 3-4 years ago by another company for approx $400. I mentioned that to the installer; he indicated that the price was the price and he was sorry he couldn’t lower it. I found the identical pump online for prices ranging from $35-$75! It looked like an easy swap, so instead of paying Rodenhiser, I ordered the part from Amazon, received it the next day. I have zero experience or training and was able to swap it and fix the problem in literally 10 minutes. I understand that service companies need to charge for labor and mark up parts costs, but a repair I could do in 10 mins for under $50 should not have carried a $1350+ price tag! This was very disappointing, and I will not use them again."

"I discovered Invicta HVAC on the mass save website. From the first contact, they were communicative and very attentive to my project. Extremely perfectionists did a beautiful job. I used to have an oil furnace as the only heat source and now we have a brand new heat pump with electric backup heat. Everything working fine. I would definitely hire them again and recommend them to everyone. thank you Guys!!"

Welcome!\n\nAt JN Service HVAC & Plumbing, we’re proud to deliver licensed, insured, and trusted HVAC and plumbing solutions to homes and businesses across Massachusetts.\n\nWith a solid reputation built on Excellence, Commitment, and Responsibility, we help you prepare your home or commercial space for the season ahead — before winter problems strike.\nOur priority is your comfort at home.\n\nWhy Choose Us?\n- 5-star Rated Company: We are a 5-star rated company with more than 1200 satisfied clients.\n- Customer Success: We focus on long-term relationships.\n- Specialist: Expert knowledge and proven skills.\n- Licensed and Insured: Our services are fully insured, providing you with peace of mind.\n- Quality in Everything we do: Best service with the best products.\n- Double-year warranty on labor.\n- Emergency Service: We're ON 24/7 to ensure your well-being.

"On one of the coldest days In January, 2024, the team arrived at our home at 9:00 am. Our 24 year old boiler was removed and the new one was installed. Thankfully, we had heat by 3:00 pm. The work site was cleaned and the installer explained all the safety features of the boiler. All went smoothly and we are satisfied with the work that was done."